Publikationen

2020  2019
2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000

Monografien

• HAHN, H.G., BARTH, F.-J., FRITZEN, C.-P.: (Inhaltsverzeichnis)
  "Aufgaben zur Technischen Mechanik",
  

  Hanser Verlag, München, 1995.

• BALAGEAS, D.,FRITZEN, C.-P., GÜEMES, A (EDS.): (Kurzbeschreibung)
  "Structural Health Monitoring",
  Hermes Science Publishing, London UK, 2006.

Veröffentlichungen in Zeitschriften und Tagungsbänden

2020

• SAHM, D., PAK, D.,FRITZEN, C.-P., DREISBACH, A.-L., DIETRICH, G., YOKARIBAS, V. (2020) Schadensdetektion mithilfe elektromechanischer Impedanzspektren. Stahlbau. 89 (4) 399-411.

• SHPAK, A.N., MUELLER, I., GOLUB, M.V., FRITZEN, C.-P. (2020) Theoretical and experimental investigation of Lamb wabes excited by partially debonded rectangular piezoelectric transducers. Smart Materials and Structures, 29 (4), 19 pp.

2019

• CAROLUS, A., RICHTER, W., FRITZEN, C.-P., SCHMIEDER, K., BRENKE, C.(2019) Experimental investigations of a manually versus an electrically driven skull drill for bedside usage, PloS one,14 (4)

• EIDEL, B., GOTE, A., FRITZEN, C.-P., OHRNDORF, A., CHRIST, H.-J. (2019) Towards physiological conditions in total knee arthroplasty by a bionics-inspired implant design (GAMM 2019). Vienna, Austria. 

• KATHOL, J., FRITZEN, C.-P. (2019) Experimentelle Wellenfelanalyse zum Dämpfungs- und Phasenverhalten piezoelektrisch angeregter Plattenstrukturen. 3. Anwendungsseminar Zustandsüberwachung mit geführten Wellen der DGZfP, Karlsruhe.

• MOLL, J., KATHOL, J., FRITZEN, C.-P., MOIX-BONET, M., RENNOCH, M., KOERDT, M.(2019) Open Guided Waves: online platform for ultrasonic guided wave measurements, Structural Health Monitoring, 18(5-6), 1903-1914.

• REITZ, T., FRITZEN, C.-P.(2019) Baseline-free Method for Acousto-Ultrasonic On-Lin-Monitoring of Cracks in Mechanically Loaded and Rotating Axles (IWSHM 2019). Standford, California, USA.

• SHPAK, A. N., GOLUB, M. V., MUELLER, I., EREMIN, A., KATHOL, J., FRITZEN, C.-P. (2019) Theoretical and experimental investigation of lamb waves induced by bonded and debonded piezoelectric actuators in a plate with a delamination. SMART 2019, Paris, France.

• WITTEK, A., FRITZEN, C.-P., HUß, A., BLASE, C. (2019) Inverse Identification of the individual, non-linear and orthotropic material properties of human internal anatomical structures based on non-invasive real-time 3D ultrasound full-field measurements. NAFEMS: Material Properties in Structure Analysis. London,GB.

• BLASE, C., DERWICH, W., SCHMITZ-RIXEN, T., FRITZEN, C.-P., HUß, A., WITTEK, A. (2019) Validation of aortic wall motion measurement by 4D ultrasound and effects of measurement uncertainty on inverse identification on inverse identification of the wall’s constitutive behavior. GAMM. Vienna, Austria.

2018

• BRÜCK, S., SCHIPPL, V., Schwarz, M., CHRIST, H.-J., FRITZEN, C.-P., WEIHE, S.(2018) Hydrogen Embrittlement Mechanism in Fatigue Behavior of Austenitic and Martensitic Stainless Steels, Metals,Vol. 8, Issue 5, 339

• BURCHARD, R., MASSA, R., SOOST, C., RICHTER, W., DIETRICH, G., OHRNDORF, A., CHRIST, H.-J., FRITZEN, C.-P., GRAW, J. A., SCHMITT, J. (2018) Biomechanics of common fixation devices for first tarsometatarsal joint fusion - a comparative study with synthetic bones, Journal of Orthopaedic and Research, 13

• BURCHARD, R., KATERLA, D., HAMMER, M., PAHLKÖTTER, A., SOOST; C:, DIETRICH, G., OHRNDORF, A., RICHTER, W., LENGSFELD, M, CHRIST, H.-J., GRAW, J.A., FRITZEN; C.-P.:(2018) Intramedullary nailing in opening wedge high tibial osteotomy - in vitro test for validation of a method of fixation, International Orthopaedics, 8, 1835-1843

• DÖNGES, B., FRITZEN, C.-P., CHRIST, H.-J. (2018) Fatigue mechanism and its modeling of an austenitic-ferritic duplex stainless steel under HCF and VHCF loading conditions. Fatigue of Materials at Very High Numbers of Loading Cycles,111-131

•  ECKSTEIN, B., BONET, M.M., BACH, M., FRITZEN, C.-P. (2018) Lamb Wave Interaction at Delamination and Debondings Due to Impact Damage in Complex Stiffened CFRP Structures. Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, Vol.1

• GINSBERG, D., FRITZEN, C.-P., LOFFELD, O. (2018) Sparsity-constrained Extended Kalman Filter concept for damage localization and identification in mechanical structures.  SMART STRUCTURES AND SYSTEMS 21 (6), 741-749

• GRIGORESCU, A., HILGENDORFF, P.-M.,ZIMMERMANN, M., FRITZEN, C.-P., CHRIST, H.-J. (2018) Fatigue behavior of austenitic stainless steels in the VHCF regime. Fatigue of Materials at Very High Numbers of Loading Cycles, 49-71

• HILGENDORFF, P.-M., GRIGORESCU, A., ZIMMERMANN, M., FRITZEN, C.-P., CHRIST, H.-J. (2018) Simulation of the VHCF deformation of austenitic stainless steels and its effect on the resonant behaviour.  Fatigue of Materials at Very High Numbers of Loading Cycles,73-94

• KATHOL, J., FRITZEN, C.-P. (2018) Experimental estimation of the dispersion characteristics of Lamb waves. European Workshop On Structural Health Monitoring (EWSHM 2018). Manchester, UK.

• MOLL, J., KATHOL, J., FRITZEN, C.-P., MOIX-BONET, M., RENNOCH, M., KOERDT, M., HERRMANN, A. S., SAUSE, M. G. R., Bach, M. (2018) Open Guided Waves: online platform for ultrasonic guided waves measurements. Structural Health Monitoring SAGE-Journals

• MUELLER, I., FRITZEN, C.-P. (2018) Failure Assessment of Piezoelectric Actuators and Sensors for Increased Reliability of SHM Systems. Structural Health Monitoring from Sensing to Processing

• SÁNCHEZ-ROMATE, X. X. F., POZO, Á. R., YOKARIBAS, V., KATHOL, J., JIMENÉZ-SUÁREZ, A., MORICHE, R., SÁnchez, M., FRITZEN, C.-P., URENA, A.(2018) Crack propagation monitoring with carbon nanotube doped adhesive films on skin-stringer sub-elements. European Workshop On Structural Health Monitoring (EWSHM 2018). Manchester, UK.

• SCHIPPL, V., BRÜCK, S., CHRIST, H.-J., FRITZEN, C.-P., SCHWARZ, M., WEIHE, S. (2018) Modeling of hydrogen effects on short crack propagation in a metastable austenitic stainless steel (X2CrNi19-11), MATEC Web of Conferences 165, 22005

• SCHIPPL, V., BRÜCK, S., CHRIST, H.-J., FRITZEN (2016) A multi-physics approach to investigate the influence of hydrogen on short fatigue crack propagation. PAMM. 

• WAGNER, S., YIM, C., MCEVOY, N., KATARIA, S., YOKARIBAS, V., KUC, A., PINDL, S, FRITZEN, C.-P., HEINE, T., DUESBERG, G.S., LEMME, M. C. (2018) Highly Sensitive Electromechanical Piezoresistive Pressure Sensors Based on Large-Area Layered PtSe2 Films, Nano Letters, 18, 3738-3745

• WITTEK, A., DERWICH, W., FRITZEN, C.-P., SCHMITZ-RIXEN, T., BLASE, C. (2018) Towards non-invasive in vivo characterization of the pathophysiological state and mechanical wall strength of the individual human AAA wall based on 4D ultrasound measurements. ZAMM-Journal of Applied Mathematics and Mechanics

• YOKARIBAS, V., FRIEBERTSHÄUSER, P., FRITZEN, C.-P. (2018) Model-assisted study for deeper analysis of conductivity and piezoresistivity of nanocomposites and films with graphene nanoplatelets for smart strucure application. European Workshop On Structural Health Monitoring (EWSHM 2018). Manchester, UK.

2017

• BLASE, C., WITTEK, A., DERWICH, W., SCHMITZ-RIXEN, T. (2017) Spatially resolved 3D in vivo strain analysis of abdominal aortic aneurysms (AAA), CMBE Proceedings, 156–158.

• BRÜCK, S., SCHIPPL, V., FRITZEN, C.-P., CHRIST, H.-J., SCHWARZ, M., WEIHE, S. (2017): Influence of hydrogen on the fatigue behavior of austenitic and martensitic stainless steels, Proceedings zum 43^rd MPA Seminar, Stuttgart.

• DERWICH, W., WITTEK, A., BLASE, C., SCHMITZ-RIXEN, T. (2017) Dynamische Analyse der biomechanischen Eigenschaften der infrarenalen Aorta, Gefäßchirurgie, 22 , 392-399.

• ECKSTEIN, B., MOIX BONET, M., BACH, M., FRITZEN, C.-P. (2017) Lamb wave interaction at debondings due to impact damage in complex stiffened CFRP structures. Proceedings Volume 10170, Health Monitoring of Structural and Biological Systems 2017 Portland, Oregon.

• GINSBERG, D., FRITZEN, C.-P. (2017) Sparsity-based Reconstruction Method for Simultaneous External Force Monitoring and Strucural Damage Identification. 8th European Workshop On Structural Health Monitoring (EWSHM 2017). Standford, USA.

• GINSBERG, D., FRITZEN, C.-P., LOFFELD, O. (2017) Sparsity Constrained Extended Kalman Filter Concept for Damage Localization and Identification in Mechanical Structures. 8th ECCOMAS Thematic Conference on Smart Strucures and Materials. Madrid, Spanien.

• GINSBERG, D., FRITZEN, C.-P. (2017) Dünnbesetzte Lösungstechniken für Last- und Schadensüberwachungssysteme. Symposium für Smarte Strukturen und Systeme. Braunschweig, Deutschland.

• GINSBERG, D., FRITZEN, C.-P. (2017) Sparse Solution Techniques in Load and Damage Monitoring Systems. Advances in Science and Technology, Vol. 101, pp. 35-44, 2017

• HILGENDORFF, P.-M., GRIGORESCU,A. C., ZIMMERMANN, M., FRITZEN, C.-P., CHRIST, H.-J. (2017) Cyclic deformation behavior of austenitic stainless steels in the very high cycle fatigue regime—Experimental results and mechanism-based simulations. Journal of Materials Research Vol. 32 Issue 23

• JUNG, H., MÜNKER, T., KAMPMANN, G., NELLES, O., FRITZEN, C.-P. (2017) A Probabilistic Approach für Fault Detection of Railway Suspensions. 11th International Workshop on Structural Health Monitoring. Stanford, USA.

• MÜLLER, I., FRITZEN, C.-P. (2017) Inspection of Piezoceramic Transducers Used for Structural Health Monitoring. Materials Vol.10 Issue 1.

• WITTEK, A., BLASE, C., DERWICH, W., SCHMITZ-RIXEN, T. AND FRITZEN, C.-P. (2017) Characterization of the mechanical behavior and pathophysiological state of abdominal aortic aneurysms based on 4D ultrasound strain imaging, SPIE Proceedings, 1033303 (2017, Invited paper).

• WITTEK, A., DERWICH, W., FRITZEN, C.-P., SCHMITZ-RIXEN, T. AND BLASE, C. (2017) Validation of full field measurement of aortic wall motion by 4D-ultrasound, CMBE Proceedings, 656–659.

• YOKARIBAS, V., SCHNEIDER, D. S., RUHKOPF, J., WAGNER, S., LEMME, M. C., FRITZEN, C.-P. (2017)Sprayable piezoresistive graphene nanoplatelet coatings for smart structure applications. Symposium für Smarte Strukturen und Systeme. Braunschweig, Deutschland.

• YOKARIBAS, V., WAGNER, S., SCHNEIDER, D. S., FRIEBERTSHÄUSER, P., LEMME, M. C., FRITZEN, C.-P. (2017): Strain Gauges Based on CVD Graphene Layers and Exfoliated Graphene Nanoplatelets with Enhanced Reproducibility and Scalability for Large Quantities. In Sensors 17 (12), S.2937. DOI: 10.3390/s17122937

2016

• BUETHE, I., DOMINGUEZ, N., JUNG, H., FRITZEN, C.-P., SÉGUR, D., REVERDY, F. (2016) Path-Based MAPOD Using Numerical Simulations. Smart Intelligent Aircraft Structures (SARISTU), 631-642.

• BRÜCK, S., CHRIST, H.-J., SCHIPPL, V., FRITZEN, C.-P., SCHWARZ, M. & WEIHE, S. (2016) Short Crack Growth of a Metastable Austenitic Stainless Steel (304L) in the Low and High Cycle Fatigue Regime under Hydrogen Influence International hydrogen conference. Wyoming, USA, submitted.

• DERWICH, W., WITTEK, A., PFISTER, K., NELSON, K., BEREITER-HAHN, J., FRITZEN, C.-P., BLASE, C. & SCHMITZ-RIXEN, T. (2016) High Resolution Strain Analysis Comparing Aorta and Abdominal Aortic Aneurysm with Real Time 3D Speckle Tracking Ultrasound. European Journal of Vascular and Endovascular Surgery, 49.

• DÖNGES, B., FRITZEN, C.-P., CHRIST, H.J. (2016) Experimental Investigation and Simulation of the Fatigue Mechanisms of a Duplex Stainless Steel under HCF and VHCF Loading Conditions. Key Engineering Materials, 664, S. 267-274.

• DÖNGES, B., FRITZEN, C.-P., CHRIST, H.J. (2016) Mechanisms Inhibiting Short Fatigue Crack Propagation at Loading Amplitudes Close to the Conventional Fatigue Limit. Procedia Structural Integrity 2, 3305-3312.

• ECKSTEIN, B., MOIX-BONET, M., BACH, M. & DOBMANN, N. (2016) Reliability Aspects of Lamb Wave Interaction at Impact Damages in Complex Stiffened CFRP Structures. 8th European Workshop On Structural Health Monitoring (EWSHM 2016). Bilbao, Spanien.

• FRITZEN, C.-P. & GINSBERG, D. (2016) Sparse Solution Techniques in Load and Damage Monitoring Systems. Advances in Science and Technology, 101, 35-44.

• FRITZEN, C.-P., SCHMIDT, C., GINSBERG, D., MUELLER, I., VOLKMER, K. & CAROLUS, T. (2016) Influence of Environmental Conditions and Damage on the Modal Properties of a Small Scale Wind Turbine – A Case Study. 8th European Workshop On Structural Health Monitoring (EWSHM 2016). Bilbao, Spanien.

• GINSBERG, D. & FRITZEN, C.-P. (2016) Impact identification and localization using a sample-force-dictionary - General Theory and its applications to beam structures. Structural Monitoring and Maintenance, 3 (3), 195-214.

• GINSBERG, D. & FRITZEN, C.-P. (2016) Sensorreduziertes Impulslastüberwachungsverfahren basierend auf dem Basis-Pursuit-Denoising-Algorithmus. 4. VDI-Fachtagung „Schwingungsanalyse & Identifikation“, VDI-Berichte 2259, 49-60.

• GOLUB, M.V., SHPAK, A.N., MUELLER, I., FRITZEN, C.-P. (2016) Numerical simulation of lamb wave excitation by the partially debonded rectangular strip-like piezoelectric actuator based on the integral approch and hp-FEM. Days on Diffragtion (DD), St. Petersburg, Russia.

• GRIGORESCU, A.C., HILGENDORFF, P.M., ZIMMERMANN, M., FRITZEN, C.-P., CHRIST, H.J. (2016) Cyclic deformation behavior of austenitic Cr-Ni-steels in the VHCF regime: Part I - Experimental study. International Journal of Fatigue 93, 250-260.

• HILGENDORFF, P.-M., GRIGORESCU, A., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H.-J. (2016) Cyclic deformation behavior of austenitic Cr–Ni-steels in the VHCF regime: Part II – Microstructure-sensitive simulation. International Journal of Fatigue, 93, 261-271.

• HILGENDORFF, P.-M., GRIGORESCU, A., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H.-J. (2016) Modeling and simulation of temperature-dependent cyclic plastic deformation of austenitic stainless steels at the VHCF limit. 21st European Conference on Fracture, ECF 21. Catania, Italy.

• HILGENDORFF, P. M., GRIGORESCU, A., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H. J. (2016) Simulation of the interaction of plastic deformation in shear bands with deformation-induced martensitic phase transformation in the VHCF regime. Key Engineering Materials, 664, 314-325.

• JUNG, H., MÜNKER, T., KAMPMANN, G., RAVE, K., FRITZEN, C.-P. & NELLES, O. (2016) A Novel Full Scale Roller Rig Test Bench for SHM Concepts of Railway Vehicles. 8th European Workshop On Structural Health Monitoring (EWSHM 2016). Bilbao, Spanien.

• LI, D., LI, H., FRITZEN, C.-P. (2016) Comments on "Clustering of Sensor Locations Using the Effective Independence Method". AIAA Journal, 2010-2011.

• MÜLLER, I. & FRITZEN, C.-P. (2016) Inspection of Piezoceramic Transducers used for Structural Health Monitoring. MDPI, submitted.

• MÜLLER, I., SHPAK, A., GOLUB, M. V. & FRITZEN, C.-P. (2016) Effects of Debonding of PWAS on the Wave Propagation and the Electro-Mechanical Impedance Spectrum. 8th European Workshop On Structural Health Monitoring (EWSHM 2016). Bilbao, Spanien.

• SCHIPPL, V., BRÜCK, S., FRITZEN, C.-P., CHRIST, H.-J., SCHWARZ, M. & WEIHE, S. (2016) Numerical simulation of the influence of hydrogen on small fatigue crack growth mechanisms in AISI304L. International hydrogen conference. Wyoming, USA, submitted.

• SCHIPPL, V., FRITZEN, C.-P., BRÜCK, S., CHRIST, H.-J., SCHWARZ, M. & WEIHE, S. (2016) Simulation of short crack propagation under hydrogen influence using a hybrid boundary element technique for anisotropic elastic solids. Proceedings in Applied Mathematics and Mechanics.

• VOGT, S., KARATIOLIOS, K., WITTEK, A., FRITZEN, C.-P., BLASE, C., MOOSDORF, R. (2016) Cyclic Longitudinal and Circumferential Deformation of the Ascending and Abdominal Aorta Measured by 3D Ultrasound Combined with Specle Tracking. The Thoracic and Cardiovascular Surgeon, 64 (S 01), OP236.
• WITTEK, A., KARATOLIOS, K., FRITZEN, C.-P., BEREITER-HAHN, J., SCHIEFFER, B. (2016) Cyclic three-dimensional wall mmotion of the human ascending and abdominal aorta characterized by time-resolved three-dimensional ultrasound speckle tracking. Biomechanics and modeling in mechanobiology 15(5), 1375-1388.

• WITTEK, A., DERWICH, W., KARATOLIOS, K., FRITZEN, C.-P., VOGT, S., SCHMITZ-RIXEN, T. & BLASE, C. (2016) A finite element updating approach for identification of the anisotropic hyperelastic properties of normal and diseased aortic walls from 4D ultrasound strain imaging. Journal of the Mechanical Behavior of Biomedical Materials, 58, 122-138.

2015

• ARREDONDO, M.A.T., SIERRA-PÉREZ, J., TIBADUIZA, D.A., McGUGAN, M. (2015) Signal-based Nonlinear Modelling for Damage Assessment under Variable Temperature Conditions by Means of Acousto-Ultrasonics. Structural Control and Health Monitoring, 22 (8), 1103-1118.

• ARREDONDO, M.A.T., BURGOS, D.A.T., BUETHE, I., MUJICA, L.E., VEJAR, M.A., RODELLAR, J. (2015) Methodologies of Damage Identification Using Nonllinear-Linear Data-Driven Modelling. Encyclopedia of Information Science and Technology, Third Edition, S. 978-991.

• ARREDONDO, M.A.T., BURGOS, D.A.T., BUETHE, I., MUJICA, L.E., VEJAR, M.A., RODELLAR, J. (2015) Validation of Damage Identification Using Non-Linear Data-Driven Modelling. Encyclopedia of Information Science and Technology, Third Edition, S. 992-1004.

• BRÜCK, S., CHRIST, H. J., SCHIPPL, V., FRITZEN, C.-P., SCHWARZ, M. & WEIHE, S. (2015) In-situ-Beobachtung der Ermüdungskurzrissausbreitung mittels Rasterelektronen- und konfokalem Laser-Mikroskop zur Ermittlung und Modellierung des Wasserstoffeinflusses. Tagung Werkstoffprüfung. Bad Neuenahr.

• BUETHE, I., DOMINGUEZ, N., JUNG, H., FRITZEN, C.-P., SÉGUR, D. & REVERDY, F. (2015) Path-based MAPOD using numerical simulations. In: WÖLCKEN, P. C. & PAPADOPOULOS, M. (eds.) Smart Intelligent Aircraft Structures (SARISTU) - Proceedings of the Final Project Conference. Moskau, Springer.

• BUETHE, I. & FRITZEN, C.-P. (2015) Quality Assessment for the EMI-based Inspection of PWAS. In: CHANG, F.-K. (ed.) International Workshop on Structural Health Monitoring 2015. Stanford, DesTech.

• DÖNGES, B., ISOTIM, K., SÖKER, M., SCHELL, N., KRUPP, U., PIETSCH, U., FRITZEN, C.-P. (2015) Experimental Investigation and Numerical Description of the Damage Evolution in a Duplex Stainless Steel Subjected to VHCF-Loading. Materials Science and Engineering, 646, 8-18.

• ECKSTEIN, B., BACH, M. & MOIX-BONET, M. (2015) Analysis of Loading Effects on Guided Ultrasonic Waves and Damage Assessment in a Full-scale CFRP Fuselage Structure. In: CHANG, F.-K. (ed.) International Workshop on Structural Health Monitoring 2015. Stanford, DesTech.

• FRITZEN, C.-P. (2015) Structural Health Monitoring - Ziele, Methoden und Anwendungen. Tagung Werkstoffprüfung. Bad Neuenahr.

• GINSBERG, D. & FRITZEN, C.-P. (2015) Sparse Solution Strategy for Simultaneous Localization and Magnitude Estimation of Impact Loads. CANSMART 2015. Vancouver.

• GINSBERG, D., RUBY, M. & FRITZEN, C.-P. (2015) Load identification approach based on basis pursuit denoising algorithm. Journal of Physics, Conference Series, 11th Int. Conference on Damage Assessment of Structures, DAMAS, 628.

• GOLUB, M. V., SHPAK, A. N., BUETHE, I. & FRITZEN, C.-P. (2015) Simulation of Dynamics and Resonance Frequencies of Piezoelectric Strip-like Actuator/Sensor using High Precision Finite Element Method. Computational Continuum Mechanics, submitted.

• KRUPP, U., GIERTLER, A., SÖKER, M., FU, H., DÖNGES, B., CHRIST, H.J., HÜSECKEN, A., The Behavior of Short Fatigue Cracks during Very High Cycle (VHCF) Fatigue of Duplex Stainless Steel, 145, 197-209.

• LOENDERSLOOT, R., BUETHE, I., MICHAELIDES, P., MOIX-BONET, M. & LAMPERAS, G. (2015) Damage Identification in Composite Panels - Methodologies and Visualisation. In: WÖLCKEN, P. C. & PAPADOPOULOS, M. (eds.) Smart Intelligent Aircraft Structures (SARISTU) - Proceedings of the Final Project Conference. Moskau, Springer.

• MOIX-BONET, M., ECKSTEIN, B., LOENDERSLOOT, R. & WIERACH, P. (2015) Identification of Barely Visible Impact Damages on a Stiffenred Composite Panel with a Probability-based Approach. In: CHANG, F.-K. (ed.) International Workshop on Structural Health Monitoring 2015. Stanford, DesTech.

• NIU, Y., FRITZEN, C.-P., JUNG, H., BUETHE, I., NI, Y.-Q. & WANG, Y.-W. (2015) Online Simultaneous Reconstruction of Wind Load ans Structural Responses - Theory and Application to Canton Tower. Computer-Aided Civil and Infrastructure Engineering, 30 (8), 666-681.

• SCHUBERT, L., BACH, M., BERGER, U., BUETHE, I., FRITZEN, C.-P., JUNG, H., LIESKE, U. & RADDATZ, F. (2015) Towards the Deployment of Acousto-ultrasonics-based SHM in Industry. In: CHANG, F.-K. (ed.) International Workshop on Structural Health Monitoring 2015. Stanford, DesTech.

2014

• BUETHE, I., MOIX-BONET, M., WIERACH, P. & FRITZEN, C.-P. (2014) Check of Piezoelectric Transducers using the Electro-Mechanical Impedance. 7th European Workshop on Structural Health Monitoring. La Cité, Nantes, France, Inria.

• CHAABAN, R. & FRITZEN, C.-P. (2014) Reducing Blade Fatigue and Damping Platform Motions of Floating Wind Turbines Using Model Predictive Control. In: CUNHA, A., CAETANO, E., RIBEIRO, P. & MÜLLER, G. (eds.) 9th International Conference on Structural Dynamics, EURODYN 2014. Porto, Portugal.

• CHAABAN, R. & FRITZEN, C.-P. (2014) Structural Load Analysis of Tension Leg Floating Wind Turbine under Blade Pitch System Faults. 6th World Conference on Structural Control and Monitoring. Barcelona, Spain.

• CHAABAN, R., GINSBERG, D. & FRITZEN, C.-P. (2014) Structural Load Analysis of Floating Wind Turbines under Blade Pitch System Faults. In: LUO, N., VIDAL, Y. & ACHO, L. (eds.) Wind Turbine Control and Monitoring. Springer.

• ECKSTEIN, B., MOIX-BONET, M. & BACH, M. (2014) Analysis of environmental and operational condition effects on Guided Ultrasonic Waves in stiffened SFRP Structures. 7th European Workshop on Structural Health Monitoring. La Cité, Nantes, France, Inria.

• FRITZEN, C.-P. & KRAEMER, P. (2014) Monitoring of Wind Energy Plants - Challanges and State of the Art. 7th European Workshop on Structural Health Monitoring. La Cité, Nantes, France, Inria.

• FRITZEN, C.-P., MOLL, J., CHAABAN, R., ECKSTEIN, B., KRAEMER, P., KLINKOV, M., DIETRICH, G., YANG, C., XING, K. J. & BUETHE, I. (2014) A Multifunctional Device for Multi-Channel EMI and Guided Wave Propagation Measurements with PWAS. 7th European Workshop on Structural Health Monitoring. La Cité, Nantes, France, Inria.

• GINSBERG, D. & FRITZEN, C.-P. (2014) New approach for impact detection by finding sparse solution. In: SAS, P., MOENS, D. & DENAYER, H. (eds.) International Conference on Noise and Vibration Engineering (ISMA2014) and the International Conference on Uncertainty in Structural Dynamics (USD2014). Leuven, Belgium.

• GOLUB, M. V., BUETHE, I., SHPAK, A. N., FRITZEN, C.-P., JUNG, H. & MOLL, J. (2014) Analysis of Lamb Wave Excitation by the Partl Debonded Circular Piezoelectric Wafer Active Sensors. 11th European Conference on Non-Destructive Testing (ECNDT 2014). Prague, Czech Republic.

• GRIGORESCU, A., HILGENDORFF, P.-M., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H.-J. (2014) Comparative study on the fatigue damage evolution of a stable and a metastable austenitic stainless steel in the VHCF regime. 6th International Conference on VHCF. Chengdu, China.

• GRIGORESCU, A., HILGENDORFF, P.-M., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H.-J. (2014) Effect of geometry and distribution of inclusions on the VHCF properties of a metastable austenitic stainless steel 11th Intern. Fatigue Congress. Melbourne, Australien, Advanced Materials Research.

• HILGENDORFF, P. M., FRITZEN, C.-P., GRIGORESCU, A., ZIMMERMANN, M. & CHRIST, H. J. (2014) Modeling of deformation-induced phase transformation during very high cycle fatigue (VHCF) using the boundary element method. Proceedings in Applied Mathematics and Mechanics.

• HILGENDORFF, P. M., GRIGORESCU, A., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H. J. (2014) Numerical investigation of the influence of shear band localization in the resonant behavior in the VHCF regime. Theoretical and Applied Mechanics Letters, 4 (051004).

• HILGENDORFF, P. M., GRIGORESCU, A., ZIMMERMANN, M., FRITZEN, C. P. & CHRIST, H. J. (2014) Simulation of Deformation-induced Martensite Formation and its Influence on the Resonant Behavior in the Very High Cycle Fatigue (VHCF) Regime. Procedia Materials Science, 3 (0), 1135-1142.

• HILGENDORFF, P. M., GRIGORESCU, A., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H. J. (2014) VHCF damage behavior of metastable austenitic stainless steel: microstructure-sensitive modeling and simulation. 6th International Conference on VHCF. Chengdu, China.

• KÖSTER, P. (2014) Mechanismenorientierte Modellierung und Simulation der mikrostrukturbestimmten Kurzrissausbreitung unter Berücksichtigung ebener und räumlicher Aspekte, Siegen, Universität Siegen.

• MOIX-BONET, M., BUETHE, I., BACH, M., FRITZEN, C.-P. & WIERACH, P. (2014) Durability of co-bonded piezoelectric transducers. 2nd International Conference on System-Integrated Intelligence: Challanges for Product and Production Engineering, SysInt 2014. Bremen, Germany, Elsevier.

• SIERRA-PÉREZ, J., TORRES-ARREDONDO, M. A., CABANES, G., GÜEMES, A., MUJICA, L. E. & FRITZEN, C.-P. (2014) Damage Detection in Metallic Beams from Dynamic Strain Measurements under different Load Cases by Using Automatic Clustering and Pattern Recognition Techniques. 7th European Workshop on Structural Health Monitoring. La Cité, Nantes, France, Inria.

• SIERRA-PÉREZ, J., TORRES-ARREDONDO, M. A., GÜEMES, A., MUJICA, L. E. & FRITZEN, C.-P. (2014) Structural Health Monitoring of Wind Turbine Blades from Distributed Strain Measurements. 6th World Conference on Structural Control and Monitoring. Barcelona, Spain.

• TORRES-ARREDONDO, M. A., SIERRA-PÉREZ, J., RODELLAR, J. & FRITZEN, C.-P. (2014) A robust multivariate data-driven modelling approach for damage detection under variable temperature conditions. 6th World Conference on Structural Control and Monitoring. Barcelona, Spain.

• TORRES-ARREDONDO, M. A., SIERRA-PÉREZ, J., ZENUNI, E., CABANES, G., RODELLAR, J., GÜEMES, A. & FRITZEN, C.-P. (2014) A Pattern Recognition Approach for Damage Detection and Temperature Compensation in Acousto-Ultrasonics. 7th European Workshop on Structural Health Monitoring. La Cité, Nantes, France, Inria.

• TORRES-ARREDONDO, M. A., TIBADUIZA, D. A., BUETHE, I., MUJICA, L. E., VEJAR, M. A., RODELLAR, J. & FRITZEN, C.-P. (2014) Methodologies of Damage Identification using Non-linear Data-Driven Modelling. In: KHOSROW-POUR, M. (ed.) IGI Encyclopedia of Information Science and Technology. Third Edition ed.

• TORRES-ARREDONDO, M. A., TIBADUIZA, D. A., BUETHE, I., MUJICA, L. E., VEJAR, M. A., RODELLAR, J. & FRITZEN, C.-P. (2014) Validation of Damage Identification using Non-linear Data-Driven Modelling. In: KHOSROW-POUR, M. (ed.) IGI Encyclopedia of Information Science and Technology. Third Edition ed.

2013

• ANSARI, F., NIU, Y., BUETHE, I., FRITZEN, C.-P. & FATHI, M. (2013) Integration of Knowledge-based Approach in SHM Systems: A Case Study of Force Identification. World Congress on Engineering and Computer Science. San Francisco.

• BUETHE, I., ECKSTEIN, B. & FRITZEN, C.-P. (2013) Model-based Detection of Sensor Faults under Changing Temperature Conditions. Structural Health Monitoring.

• BUETHE, I. & FRITZEN, C. P. (2013) Investigation on Sensor Fault Effects of Piezoelectric Transducers on Wave Propagation and Impedance Measurements. COMSOL Conference 2013. Rotterdam.

• BUETHE, I. & FRITZEN, C. P. (2013) Sensor Performance Assessment Based on a Physical Model and Impedance Measurements. Key Engineering Materials, 569-570, 751-758.

• CHAABAN, R. & FRITZEN, C.-P. (2013) Model Predictive and Individual Blade Pitch Control for Stabilizing Platform Pitching Motion of Floating Offshore Wind Turbines. EWEA Offshore Conference 13. Frankfurt.

• ECKSTEIN, B., BACH, M., BOCKENHEIMER, C., CHEUNG, C., CHUNG, H., ZHANG, D. & LI, F. (2013) Lars Scale Monitoring of CFRP Structures by Acousto-Ultrasonics - A Flight Test Experience. In: CHANG, F.-K. (ed.) International Workshop on Structural Health Monitoring. Stanford, DEStech Publications, Inc.

• FRITZEN, C.-P., KLINKOV, M. & KRAEMER, P. (2013) Vibration-Based Damage Diagnosis and Monitoring of External Loads. In: OSTACHOWICZ, W. & GÜEMES, J. A. (eds.) New Trends in Structural Health Monitoring. Springer Vienna.

• FRITZEN, C.-P., KRAEMER, P. & BUETHE, I. (2013) Vibration-based Damage Detection under Changing Environmental and Operational Conditions. Advances in Science and Technology, 83, pp 95-104.

• GINSBERG, D., NIU, Y. & FRITZEN, C.-P. (2013) Online Wind Load Reconstruction for a Wind Energy Plant using Simulated Structural Responses. 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure. Hong Kong.

• GOLUB, M. V., SHPAK, A. N., BUETHE, I., FRITZEN, C.-P., JUNG, H. & MOLL, J. (2013) Continuous wavelet transform application in diagnostics of piezoelectric wafer active sensors. Days on Diffraction.

• HILGENDORFF, P. M., FRITZEN, C. P., GRIGORESCU, A., ZIMMERMANN, M. & CHRIST, H. J. (2013) Simulation of microstructural damage evolution during very high cycle fatigue (VHCF) using the boundary element method. PAMM, Proc. Appl. Math. Mech. Novi Sad, WILEY-VCH Verlag.

• HILGENDORFF, P.-M., GRIGORESCU, A., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H.-J. (2013) The effect of damage accumulation in slip bands on the resonant behavior in the very high cycle fatigue (VHCF) regime. Proceedings of the 13th International Conference on Fracture. Beijing, China.

• HILGENDORFF, P.-M., GRIGORESCU, A., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H.-J. (2013) Simulation of irreversible damage accumulation in the very high cycle fatigue (VHCF) regime using the boundary element method. Materials Science & Engineering A, 575, 169-176.

• NIU, Y., BUETHE, I., ANSARI, F., FATHI, M. & FRITZEN, C.-P. (2013) Towards Integration of a Knowledge-Based Approach into SHM. 5th European-American Workshop on Reliability of NDE. Berlin.

• NIU, Y., FRITZEN, C.-P. & NI, Y.-Q. (2013) Online Simultaneous Reconstruction of Wind Load and Structural Responses for High-Rise Structures. In: CHANG, F.-K. (ed.) International Workshop on Structural Health Monitoring. Stanford, DEStech Publications, Inc.

• NIU, Y., FRITZEN, C.-P. & NI, Y.-Q. (2013) Online Wind Load Reconstruction Study for Canton Tower. 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure. Hong Kong.

• TIBADUIZA, D.-A., TORRES-ARREDONDO, M. A., MUJICA, L. E., RODELLAR, J. & FRITZEN, C.-P. (2013) A study of two unsupervised data driven statistical methodologies for detecting and classifying damages in structural health monitoring. Mechanical Systems and Signal Processing, 41 (1), 467-484.

• TORRES-ARREDONDO, M. A. (2013) Acoustic Emission Testing and Acousto-Ultrasonics for Structural Health Monitoring, Siegen, Universität Siegen.

• TORRES-ARREDONDO, M. A., BUETHE, I., TIBADUIZA, D.-A., RODELLAR, J. & FRITZEN, C.-P. (2013) Damage detection and classification in pipework using acousto-ultrasonics and non-linear data-driven modelling. Journal of Civil Structural Health Monitoring, 297-306.

• TORRES-ARREDONDO, M. A., TIBADUIZA, D.-A., MCGUGAN, M., TOFTEGAARD, H., BORUM, K.-K., MUJICA, L. E., RODELLAR, J. & FRITZEN, C.-P. (2013) Multivariate data-driven modelling and pattern recognition for damage detection and identification for acoustic emission and acousto-ultrasonics. Smart Materials and Structures, 22 (10), 105023.

• TORRES-ARREDONDO, M. A., TIBADUIZA, D.-A., MUJICA, L. E., RODELLAR, J. & FRITZEN, C.-P. (2013) Data-Driven Multivariate Algorithms for Damage Detection and Identification: Evaluation and Comparison. Structural Health Monitoring, 1-14.

2012

• BUETHE, I., KRAEMER, P. & FRITZEN, C.-P. (2012) Applications of Self-Organizing Maps in Structural Health Monitoring. Key Engineering Materials, 518, 37-46.

• BUETHE, I., TORRES-ARREDONDO, M. A., MUJICA, L. E., RODELLAR, J. & FRITZEN, C.-P. (2012) Damage Detection in Piping Systems Using Pattern Recognition Techniques. 6th European Workshop on Structural Health Monitoring. Dresden.

• EBERT, C. (2012) Systemidentifikation zur Modellierung mechanischer Strukturen - Markovparameter zur experimentellen Schadenserfassung, Siegen, Universität Siegen.

• ECKSTEIN, B., FRITZEN, C.-P. & BACH, M. (2012) Considerations on the Reliability of Guided Ultrasonic Wave-Based SHM Systems for CFRP Aerospace Structures. 6th European Workshop on Structural Health Monitoring. Dresden.

• GHARIBNEZHAD, F., MUJICA, L. E., RODELLAR, J. & FRITZEN, C.-P. (2012) Damage Detection Using Robust Fuzzy Principal Component Analysis. 6th European Workshop on Structural Health Monitoring. Dresden.

• GRIGORESCU, A., HILGENDORFF, P., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H.-J. (2012) Experimentelle Methoden zur Charakterisierung der VHCF-Schädigungsentwicklung am Beispiel eines metastabilen Austenitstahls. In: BORSUTZKI, M. & MONINGER, G. (eds.) Fortschritte in der Werkstoffprüfung für Forschung und Praxis. Düsseldorf, Verlag Stahleisen GmbH.

• MOLL, J., HEFTRICH, C. & FRITZEN, C. (2012) A rapid and velocity-independent damage localization approach for ultrasonic structural health monitoring. Ultrasonics, Ferroelectrics and Frequency Control, IEEE Transactions on, 59 (6), 1309-1315.

• MOLL, J., TORRES-ARREDONDO, M. A. & FRITZEN, C.-P. (2012) Computational aspects of guided wave based damage localization algorithms in flat anisotropic structures. Smart Structures and Systems. Smart Structures and Systems, 10(3): (3?), 229-251.

• NIU, Y. & FRITZEN, C.-P. (2012) Comparison and Practical Aspects of Two Approaches for Online Load Reconstruction. 6th European Workshop on Structural Health Monitoring. Dresden, Germany.

• NIU, Y., KRAEMER, P. & FRITZEN, C.-P. (2012) Operational Modal Analysis for Canton Tower. Smart Structures and Systems, 10 (4-5 (2012)), 393-410.

• TORRES-ARREDONDO, M. A., BUETHE, I., TIBADUIZA, D.-A., RODELLAR, J. & FRITZEN, C.-P. (2012) Damage detection and classification in pipework using acousto-ultrasonics and probabilistic non-linear modelling. Civil Structural Health Monitoring Workshop (CSHM-4). Berlin, Germany

• TORRES-ARREDONDO, M. A. & FRITZEN, C.-P. (2012) Characterization and classification of modes in acoustic emission based on dispersion features and energy distribution analysis. Journal of Shock and Vibration, 19 ((1-9)), 825-833.

• TORRES-ARREDONDO, M. A. & FRITZEN, C.-P. (2012) Impact monitoring in smart structures based on gaussian processes. Proceedings of the 4th International Symposium on NDT in Aerospace. Augsburg, Germany

• TORRES-ARREDONDO, M. A. & FRITZEN, C.-P. (2012) Ultrasonic Guided Wave Dispersive Characteristics in Composite Structures Under Variable Temperature and Operational Conditions. 6th European Workshop on Structural Health Monitoring. Dresden.

• TORRES-ARREDONDO, M. A., JUNG, H. & FRITZEN, C.-P. (2012) Towards the Development of Predictive Models for the System Design and Modal Analysis of Acoustic Emission Based Technologies. Key Engineering Materials, (518), 396-408.

• TORRES-ARREDONDO, M. A., TIBADUIZA, D.-A., MUJICA, L. E., RODELLAR, J. & FRITZEN, C.-P. (2012) Damage assessment in a stiffened composite panel using non-linear data-driven modelling and ultrasonic guided waves. Proceedings of the 4th International Symposium on NDT in Aerospace. Augsburg, Germany

• YANG, C. & FRITZEN, C.-P. (2012) Piezoelectric paint: characterization for further applications. Smart Materials and Structures, 21 (4), 045017.

2011

• FRITZEN, C.-P. & KRAEMER, P. (2011) Vibration Based Damage Detection for Structures of Offshore Wind Energy Plants. In: CHANG, F.-K. (ed.) Structural Health Monitoring. Stanford, CA, USA.

• FRITZEN, C.-P., SCHULTE, R. T. & JUNG, H. (2011) A modelling approach for virtual development of wave-based SHM systems. Journal of Physics, Conference Series, 9th Int. Conference on Damage Assessment of Structures, DAMAS. Oxford.

• GRIGORESCU, A., MÜLLER-BOLLENHAGEN, C., HILGENDORFF, P., KUEBBELER, M., ZIMMERMANN, M., FRITZEN, C.-P. & CHRIST, H.-J. (2011) Characterization and Simulation of the Damage Accumulation in the Very High Cycle Fatigue (VHCF) Regime in a Metastable Austenitic Stainless Steel Based on the Resonant Behavior. Proceedings of Materials Science and Technology (MS&T). Columbus, Ohio.

• JUNG, H., SCHULTE, R. T. & FRITZEN, C.-P. (2011) Interaction of Elastic Waves with Delaminations in CFRP Structures: A Numerical Study Using the Spectral Element Method. Structural Helath Monitoring. Stanford, CA, USA.

• KLINKOV, M. (2011) Identification of Unknown Structural Loads from Dynamic Measurements Using Robust Observers, Siegen, Universität Siegen.

• KRAEMER, P. (2011) Schadensdiagnoseverfahren für die Zustandsüberwachung von Offshore-Windenergieanlagen, Siegen, Universität Siegen.

• KRAEMER, P., BUETHE, I. & FRITZEN, C.-P. (2011) Damage detection under changing operational and environmental conditions using Self Organizing Maps. Smart Structures and Materials (5th Eccomas Thematic Conf.). Saarbrücken.

• KRUPP, U., ROTH, I., CHRIST, H.-J., KÜBBELER, M., FRITZEN, C.-P., SCHARNWEBER, M., OERTEL, C.-G. & SKROTZKI, W. (2011) The Role of Grain Orientation and Martensitic Transformation during Propagation of Short Fatigue Ckracks in Austenitic Stainless Steel. Key Engineering Materials, 465, 55-60.

• KÜBBELER, M., ROTH, I., KRUPP, U., FRITZEN, C.-P. & CHRIST, H.-J. (2011) Simulation of stage I-crack growth using a hybrid boundary element technique. Engineering Fracture Mechanics, 78, 462-468.

• LI, D. S. (2011) Sensor Placement Methods and Evaluation Criteria in Structural Health Monitoring, Siegen, Universität Siegen.

• MOLL, J. (2011) Strukturdiagnose mit Ultraschallwellen durch Verwendung von piezoelektrischen Sensoren und Aktoren, Siegen, Universität Siegen.

• MOLL, J., REZK-SALAMA, C., SCHULTE, R. T., KLINGERT, T., FRITZEN, C.-P. & KOLB, A. (2011) Interactive Simulation and Visualization of Lamb Waves Propagation in Isotropic and Anisotropic Structures. Journal of Physics, Conference Series, 9th Int. Conference on Damage Assessment of Structures, DAMAS, 305, 012095.

• NIU, Y. & FRITZEN, C.-P. (2011) Operational Modal Analysis for a Benchmark High-Rise Structure. In: CHANG, F.-K. (ed.) Structural Health Monitoring. Stanford, CA, USA.

• NIU, Y., KLINKOV, M. & FRITZEN, C.-P. (2011) Extension of the Generalized Unknown Input Kalman Filter for Online-Reconstruction of External Structural Loads. In: CHANG, F.-K. (ed.) Structural Health Monitoring. Stanford, CA, USA.

• NIU, Y., KLINKOV, M. & FRITZEN, C.-P. (2011) Online Force Reconstruction Using an Unknown-Input Kalman Filter Approach. Proceedings of the 8th International Conference on Structural Dynamics. Leuven, Belgium.

• NIU, Y., KRAEMER, P. & FRITZEN, C.-P. (2011) Operational Modal Analysis for A Benchmark High-Rise Structure. In: CHANG, F.-K. (ed.) 8th International Workshop on Structural Heath Monitoring (IWSHM 2011). Stanford, California, USA.

• NIU, Y., KRAEMER, P. & FRITZEN, C.-P. (2011) Operational Modal Analysis for the Guangzhou New TV Tower. IMAC XXIX. Jacksonville, Florida, USA.

• SCHULTE, R. T. & FRITZEN, C.-P. (2011) Simulation of wave propagation in damped composite structures with piezoelectric coupling. Journal of Theoretical and Applied Mechanics, JTAM, 49 (3), 879-903.

• TORRES-ARREDONDO, M. A. & FRITZEN, C.-P. (2011) Characterization and classification of modes in acoustic emission based on dispersion features and energy distribution analysis. ICEDyn 2011. Tavira, Portugal.

• TORRES-ARREDONDO, M. A. & FRITZEN, C.-P. (2011) A Viscoelastic plate theory for the fast modelling Lamb wave solutions in NDT / SHM applications. Ultragarsas (Ultrasound), 66 (2), 7-13.

• TORRES-ARREDONDO, M. A., JUNG, H. & FRITZEN, C.-P. (2011) A Study of Attenuation and Acoustic Energy Anisotropy of Lamb Waves in Multilayered Anisotropic Media for NDT and SHM applications. Proceedings of the 6th International Workshop NDT in Progress. Prague, Brno University of Technology.

• TORRES-ARREDONDO, M. A., JUNG, H. & FRITZEN, C.-P. (2011) Towards the development of predictive models for the system design and modal analysis of acoustic emission based technologies. Proceedings of the 2nd International Workshop on Smart Diagnostics of Structures. Krakow, Poland.

• TORRES-ARREDONDO, M. A., YANG, C. & FRITZEN, C.-P. (2011) On the Application of Bayesian Analysis and Advanced Signal Processing Techniques for the Impact Monitoring of Smart Structures. In: CHANG, F.-K. (ed.) Structural Health Monitoring. Stanford, CA, USA.

• YANG, C. & FRITZEN, C.-P. (2011) Characterization of piezoelectric paint and its refinement for structural health monitoring applications. 3rd International Confernece on Smart Materials and Nanotechnology in Engineering. Shenzhen, China.

• YANG, C. & FRITZEN, C.-P. (2011) A novel piezoelectric paint sensor for non-destructive testing. Int. Workshop of smart materials, structures and NDT in aerospace. Montreal, Canada.

• YANG, C. & FRITZEN, C.-P. (2011) Piezoelectric Paint as Spatially Distributed Modal Sensors. In: CHANG, F.-K. (ed.) Structural Health Monitoring 2011. Stanford, CA, USA.

• YANG, C., TORRES-ARREDONDO, M. A. & FRITZEN, C.-P. (2011) Acoustic emission simulation for online impact detection. Proceedings of COMSOL Conference. Stuttgart, Germany

2010

• ECKSTEIN, B., FRITZEN, C.-P., BACH, M. & MOIX-BONET, M. (2010) Monitoring of Omegs-Stringer Stiffened CFRP Structures by Acousto Ultrasonics. In: CASCIATI, F. & GIORDANO, M. (eds.) Fifth European Workshop on Structural Health Monitoring. Sorrento, Naples, Italy.

• NIU, Y., KLINKOV, M. and FRITZEN, C.-P. (2010):
  "Online Reconstruction of Concentrated and Continuously Distributed Force Using a Robust Observer Technique",
  

  Proc. of 5th EWSHM, Sorrento, Italy, pp. 994-999.

• TORRES ARREDONDO, M.A. und FRITZEN, C.-P. (2010):
  "On the application of digital signal processing techniques and statistical analysis for the localization of acoustic emissions",
  

  Proc. of 5th EWSHM, Sorrento, Italy, pp. 1017-1022.

• FRITZEN, C.-P.; KRAEMER, P. und KLINKOV, M. (2010):
  "An Integrated SHM Approach for Offshore Wind Energy Plants",
  

  IMAC XXVIII, Jacksonville, Florida, USA.

• KRAEMER, P. und FRITZEN, C.-P. (2010):
  "Aspects of Operational Modal Analysis for Structures of Offshore Wind Energy Plants",
  

  IMAC XXVIII, Jacksonville, Florida, USA.

• FRITZEN, C.-P.; KRAEMER, P. und KLINKOV, M. (2010):
  "Schwingungsbasierte Schadensdiagnose für Offshore-Windenergieanlagen",
  

  VDI Tagung "Schwingungsanalyse & Identifikation", Leonberg, Germany, Vol. 2093, pp. 183-195. LINK

• KRAEMER, P.; BÜTHE, I. und FRITZEN, C.-P. (2010):
  "Damage detection under variable environmental conditions using Self Organizing Maps",
  

  IMEKO TC, 11th Workshop on Smart Diagnostics of Structures, Kraków, Poland.

• KRAEMER, P. und FRITZEN, C.-P. (2010):
  "Vibration analysis for structures of offshore wind energy plants",
  

  Deutsche Windenergie Konferenz, DEWEK2010, Bremen, Germany. LINK

• SCHULTE, R. T.; FRITZEN, C.-P. (2010):
  "A Spectral Element Approach for Modeling of Wave-Based Structural Health Monitoring Systems",
  

  AIP Conference Proceedings, Vol. 1281, ICNAAM 2010: International Conference of Numerical Analysis and Applied Mathematics 2010, pp. 1753-1756. LINK

• SCHULTE, R. T.; FRITZEN, C.-P. (2010):
  "Modelling of Wave-Based SHM Systems Using the Spectral Element Method",
  

  Proceedings in Applied Mathematics and Mechanics, Vol. 10, Number 1, pp. 15 – 18. LINK

• SCHULTE, R. T.; FRITZEN, C.-P. (2010):
  "Spectral element modelling of wave propagation in isotropic and anisotropic flat shell-structures including delamination and debonding",
  

  Proc. 5th European Workshop on Structural Health Monitoring, pp. 523-528. LINK

• SCHULTE, R. T.; FRITZEN, C.-P.; MOLL, J. (2010):
  "Spectral element modelling of wave propagation in isotropic and anisotropic shell-structures including different types of damage",
  

  IOP Conference Series: Material Science and Engineering, Vol. 10, Number 1. LINK

• MOLL, J. und FRITZEN, C.-P. (2010):
  "Time-Varying Inverse Filtering for High Resolution Imaging with Ultrasonic Guided Waves",
  

  10th European Conference on Non-Destructive Testing, Moscow, Russia (on CD-ROM). LINK

• MOLL, J.; HEFTRICH, C. und FRITZEN, C.-P. (2010):
  "Time-Varying Inverse Filtering of Narrowband Ultrasonic Signals",
  

  Structural Health Monitoring, Vol. 9, Number 6. LINK

• KÖSTER, P., KNOBBE, H., FRITZEN, C.-P., CHRIST, H.-J., KRUPP, U. (2010):
  "A three-dimensional model for stage I-crack propagation",
  

  Technische Mechanik, Vol. 30, pp. 185-194. LINK

• KÜBBELER, M., ROTH, I., KRUPP, U., FRITZEN, C.-P., CHRIST, H.-J. (2010):
  "Simulation of stage I-crack growth using a hybrid boundary element technique",
  

  Engineering Fracture Mechanics (doi:10.1016/j.engfracmech.2010.01.004). LINK

• KÖSTER, P., KNOBBE, H., FRITZEN, C.-P., CHRIST, H.-J., RIEDLER, M. (2010):
  "Simulation of stage I-short crack propagation in forged Ti6Al4V",
  

  Procedia Engineering, Vol. 2, Number 2, pp. 1701-1709. LINK

• KRUPP, U., ROTH, I., CHRIST, H.-J., KÜBBELER, M., FRITZEN, C.-P. (2010):
  "In Situ SEM Observation and Analysis of Martensitic Transformation During Short Fatigue Crack Propagation in Metastable Austenitic Steel",
  

  Advanced Engineering Materials, Vol. 12, Number 4, pp. 255-261. LINK

• ROTH, I., KÜBBELER, M., KRUPP, U., CHRIST, H.-J., FRITZEN, C.-P. (2010):
  "Crack initiation and short crack growth in metastable austenitic stainless steel in the high cycle fatigue regime",
  

  Procedia Engineering, Vol. 2, Number 1, pp. 941-948. LINK

• KNOBBE, H., KÖSTER, P., CHRIST, H.-J., FRITZEN, C.-P., RIEDLER, M. (2010):
  "Initiation and propagation of short fatigue cracks in forged Ti6Al4V",
  

  Procedia Engineering, Volume 2, Number 1, pp. 931-940. LINK

• KRUPP, U., ROTH, I., CHRIST, H.-J., KÜBBELER, M., FRITZEN, C.-P., SCHARNWEBER, M., OERTEL, C.-G., SKROTZKI, W. (2010):
  "The Role of Grain Orientation and Martensitic Transformation during Propagation of Short Fatigue Cracks in Austenitic Stainless Steel",
  

  Beitrag eingereicht zur 6th International Conference on Materials Structure & Micromechanics of Fracture MSMF6 2010, 28. – 30. Juni 2010, Brno.

• MOLL, J., SCHULTE, R. T., HARTMANN, B., FRITZEN, C.-P.,NELLES, O. (2010):
  "Multi-site damage localization in anisotropic plate-like structures using an active guided wave structural health monitoring system",
  

  Smart Materials and Structures, Vol. 19, Number 4. LINK

• KRUPP, U., KNOBBE, H., CHRIST, H.-J., KÖSTER, P., FRITZEN, C.-P. (2010):
  "The significance of microstructural barriers during fatigue of a duplex steel in the high- and very-high-cycle-fatigue (HCF/VHCF) regime",
  

  International Journal of Fatigue, Vol. 32, Number 6, pp. 914-920. LINK

• CROXFORD, A. J., MOLL, J., WILCOX, P.D., MICHEALS, J. E. (2010):
  "Efficient temperature compensation strategies for guided wave structural health monitoring",
  

  Ultrasonics, Vol. 50, Number 4-5, pp. 517-528. LINK

• KNOBBE, H., KÖSTER, P., KRUPP, U., CHRIST, H.-J., FRITZEN, C.-P. (2010):
  "Microstructural aspects of duplex steel during high cycle and very high cycle fatigue",
  

  Journal of Physics: Conference Series, Vol 240, Number 1. LINK

• KRUPP, U., ROTH, I., CHRIST, H. J., KÜBBELER, M., FRITZEN, C.-P., STROTZKI, W. (2010):
  "Scanning electron microscopy and computer modelling of microstructural changes in the vicinity of propagatin short fatigue cracks in austenitic stainless steels",
  

  Journal of Physics: Conference Series, Vol 240, Number 1. LINK

2009

• LI, D. S., LI, H. N. & FRITZEN, C.-P. (2009):
  "On Optimal Sensor Placement Criterion for Structural Health Monitoring with Representative Least Squares Method",
  

  Key Engineering Materials, 413-414 (Damage Assessment of Structures VIII), 383-391.

• PAPADIMITRIOU, C.; FRITZEN, C.-P.; KRAEMER, P.; Ntotsios, E. (2009):
  "Fatigue Lifetime Estimation in Structures using Ambient Vibration Measurements",
  

  COMPDYN 2009. Rhodes, Greece, availlable on CD-ROM. LINK

• ROTH, I., KRUPP, U., CHRIST, H. J., KÜBBELER, M., FRITZEN, C.-P. (2009):
  "Deformation induced martensite formation in metastable austenitic steel during in situ fatigue loading in a scanning electron microscope",
  

  Proc. 8th European Symposium on Martensitic Transformation, ESOMAT 2009, Prag, LINK

• KÖSTER, P., KNOBBE, H., FRITZEN, C.-P., CHRIST, H.-J., KRUPP, U. (2009):
  "A three-dimensional model for stage I-crack propagation",
  

  Technische Mechanik. LINK

• KÖSTER, P., FRITZEN, C.-P., KNOBBE, H., CHRIST, H.-J., KRUPP, U. (2009):
  "Simulation of stage I-crack growth using a 3D-model",
  

  Proceedings in Applied Mathematics and Mechanics, Vol. 9, Number 1, pp. 201-202. LINK

• KÜBBELER, M., FRITZEN, C.-P., ROTH, I., CHRIST, H.-J., KRUPP, U. (2009):
  "Simulation of short crack propagation using a hybrid boundary element technique",
  

  Proceedings in Applied Mathematics and Mechanics, Vol. 9, Number 1, pp. 203 - 204. LINK

• FRITZEN, C.-P., KRAEMER, P. (2009):
  "Self-diagnosis of smart structures based on dynamical properties",
  

  Mechanical Systems and Signal Processing, Vol. 23, Number 6, pp. 1830-1845. LINK

• KÜBBELER, M., ROTH, I., KRUPP, U., FRITZEN, C.-P., CHRIST, H.-J. (2009):
  "Simulation of Short Crack Propagation in a Microstructure Using a Hybrid Boundary Element Technique",
  

  Proc. International Conference on Crack Path, Vicenza, Italian, 23.-25.September, on CD-ROM. LINK

• MOLL, J.; SCHULTE, R.T.; FRITZEN, C.-P. (2009):
  "Damage Localization in Anisotropic Plates Using an Active Guided Wave Structural Health Monitoring System",
  

  in 7th International Workshop on Structural Health Monitoring, pp. 815-822. LINK

• FRITZEN, C.-P.; SCHULTE, R.T. (2009):
  "Modelling of Wave Propgation and Impedance Spectra with the Spectral Element Method",
  

  in 7th International Workshop on Structural Health Monitoring, pp. 2282-2289. LINK

• KLINKOV, M.; FRITZEN, C.-P., (2009):
  "On Field Wind Load Reconstruction for a 5MW Onshore Wind Energy Plant",
  

  in 7th International Workshop on Structural Health Monitoring, pp. 1613-1620. LINK

• KÖSTER, P., KNOBBE, H., FRITZEN, C.-P., CHRIST, H.-J., KRUPP, U. (2009):
  "Simulation of stage I short crack propagation in an austenitic-ferritic duplex steel",
  

  Proc. 12th International Conference on Fracture, Ottawa, Canada, July 12-17, on CD-ROM.

• CHRIST, H.-J., DÜBER, O., FRITZEN, C.-P., KNOBBE, H., KÖSTER, P., KRUPP, U., KÜNKLER, B. (2009):
  "Propagation behaviour of microstructural short fatigue cracks in the high-cycle fatigue regime",
  

  Computational Materials Science, Vol. 46, Number 3, pp. 561-565. LINK

• SCHULTE, R. T.; XING, K.; FRITZEN, C.-P. (2009):
  "Spectral element modelling of wave propagation and impedance based SHM systems",
  

  Key Engineering Materials, Vols. 413-414, pp. 683-690. LINK

• XING, K.; SCHULTE, R. T.; FRITZEN, C.-P. (2009):
  "Numerical and Experimental Investigation of the Sensing Area of Piezoelectric Elements for Damage Detection with the E/M Impedance Method",
  

  Key Engineering Materials, Vols. 413-414, pp. 253-260. LINK

2008

• CHRIST, H.-J., DÜBER, O., KNOBBE, H., FRITZEN, C.-P., KRUPP, U., KÜNKLER, B., KÖSTER, P. (2008):"Propagation behaviour of microstructural short fatigue cracks – experimental characterization and mechanism-based simulation",

  Materialwissenschaft und Werkstofftechnik, Vol. 39, pp. 688-693. LINK

• SCHULTE, R. T.; FRITZEN, C.-P. (2008):
  "Simulation of Wave Propagation in Complex Structures with the Spectral Element Method",
  

  Proceedings in Applied Mathematics and Mechanics, Vol. 8, Number 1, pp. 10701-10702. LINK

• SCHULTE, R. T.; FRITZEN, C.-P. (2008):
  "Spectral element modelling of wave propagation in stringer stiffened structures",
  

  Proc. 4th European Workshop on Structural Health Monitoring, Cracow, Poland, pp. 507-514. LINK

• KRAEMER, P.; LAUTENSCHLAGER, D.; FRITZEN, C.-P. und OERTEL, U. (2008):
  "Condition Monitoring Methods for Machine and Drive Train Components of Wind Energy Plants",
  

  Deutsche Windenergie Konferenz (DEWEK2008), Bremen, Germany.

• KRAEMER, P. und FRITZEN, C.-P. (2008):
  "Damage Identification of Structural Components of Offshore Wind Energy Plants",
  

  Deutsche Windenergie Konferenz (DEWEK2008), Bremen, Germany.

• KRAEMER, P. und FRITZEN, C.-P. (2008):
  "Sensor Fault Detection and Signal Reconstruction using Mutual Information and Kalman Filters",
  

  International Conference on Noise and Vibration Engineering, Leuven, Belgium, pp. 3267-3282. LINK

• MOLL, J.; KRAEMER, P. und FRITZEN, C.-P. (2008):
  "Compensation of Environmental Influences for Damage Detection using Classification Techniques",
  

  4th European Workshop on Structural Health Monitoring, Cracow, Poland, pp. 1080-1087.

• FRITZEN, C.-P.; KRAEMER, P. und KLINKOV, M. (2008):
  "Structural Health Monitoring of Offshore Wind Energy Plants",
  

  4th European Workshop on Structural Health Monitoring, Cracow, Poland, pp. 3-21.

• M. KLINKOV, C.-P. FRITZEN (2008):
  "Online Wind Load Estimation for Offshore Wind Energy Plants",
  

  Deutsche Windenergie Konferenz (DEWEK 2008), Bremen, Germany.

• ECKSTEIN, B., FRITZEN, C.-P., BACH, M. (2008):
  "Advancements in Self-Diagnosis of Bonded Piezoelectric Transducers",
  

  Proc. 4th European Workshop Structural Health Monitoring, Krakau, Poland, pp. 430-437.

• U. KRUPP, H. KNOBBE, O. DÜBER, H.-J. CHRIST, P. KÖSTER, U. KRUPP, B. KÜNKLER, C.-P. FRITZEN (2008):
  "Propagation Behaviour of Microstructurally Short Fatigue Cracks in the High-Cycle- and Very-High-Cycle Fatigue Regime",
  

  Materials Science Forum, Vol. 567-568, pp. 425-428. LINK

• B. KÜNKLER, O. DÜBER, P. KÖSTER, U. KRUPP, C.-P. FRITZEN, H.-J. CHRIST (2008):
  "Modelling of short crack propagation – Transition from stage I to stage II",
  

  Engineering Fracture Mechanics, Vol. 75, Number 3-4, pp. 715-725. LINK

• KRUPP, U., KNOBBE, H., CHRIST, H.-J., KÖSTER, P., FRITZEN, C.-P. (2008):
  "On the role of microcrack initiation during fatigue of a duplex steel in the very-high-cycle-fatigue (VHCF) regime",
  

  Proceedings of 17th European Conference on Fracture, Brno, Tschechien, Herausgeber: J. Pokluda, P. Lukáś, P. Šandera, I. Dlouhy, ESIS Czech Chapter, Brno, 2008, pp. 225-232.

• RUPP, U., ROTH, I., CHRIST, H. J., KÜBBELER, M., FRITZEN, C.-P., MAZILU, I., BLOCHWITZ, C. (2008):
  "Rasterelektronenmikroskopische in-situ-Beobachtung und mechanismenorientierte Modellierung kurzer Ermüdungsrisse in rostfreien austenitischen Edelstählen",
  

  Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffpürfung, Tagungsband zur Werkstoffprüfung 2008, Berlin, Herausgeber: H. Frenz und W. Grellmann, DVM Bericht 642, Deutscher Verband für Materialforschung und -prüfung e. V., Berlin, pp. 113 – 120.

• LI, D.S., FRITZEN, C.-P. , LI, H.N. (2008):
  "Extended MinMAC algorithm and comparison of sensor placement methods",
  Conference: 2008 IMAC-XXVI: Conference & Exposition on Structural Dynamics,on CD-ROM. LINK

2007

• KRUPP, U., DÜBER, O., CHRIST, H.-J., KÜNKLER, B., KÖSTER, P., FRITZEN, C.-P. (2007):
  "Propagation Mechanisms of Microstructurally Short Cracks - Factors Governing the Transition from Short- to Long-Crack Behavior",
  

  Materials Science and Engineering, Materials Science and Engineering: A, Vol. 462, Number 1-2, pp.174-177. LINK

• LI, D.S., LI, H.N., FRITZEN, C.-P. (2007):
  "The Connection Between Effective Independence and Modal Kinetic Energy Methods for Sensor Placement",
  

  Journal of Sound and Vibration, Vol. 305, Number 4-5, p.945–955. LINK

• XING, K.J., FRITZEN, C.-P. (2007):
  "Monitoring of Growing Fatigue Damage Using the E/M Impedance Method",
  

  Key Engineering Materials, Vol. 347, pp. 153-158. LINK

• KRAEMER, P., FRITZEN, C.-P. (2007):
  "Sensor Fault Identification Using Autoregressive Models and the Mutual Information Concept",
  

  Key Engineering Materials, Vol. 347, pp. 387-392. LINK

• KLINKOV, M., FRITZEN, C.-P. (2007):
  "An Updated Comparison of Force Reconstruction Methods",
  

  Key Engineering Materials, Vol. 347, pp. 461-466. LINK

• LI, D.S., LI, H.-N., FRITZEN, C.-P. (2007):
  "Representative Least Squares Method for Sensor Placement",
  

  Proc.3rd Intl. Conf. on Structural Health Monitoring and Intelligent Infrastructure, Nov. 13-16, 2007, Vancouver, Canada. Paper No. 59, Abstract in pp. 176.

• FRITZEN, C.-P., KLINKOV, M. (2007):
  "Online Wind Load Estimation for Offshore Wind Energy Plants",
  

  Fu-Kuo Chang (Ed.): Proc. of the 6. Intl. Workshop on Structural Health Monitoring, Stanford, CA, Sept. 2007, pp. 1905-1912 and on CD-ROM.

• KNOBBE, H., KÖSTER, P., KRUPP, U., CHRIST, H.-J., FRITZEN, C.-P., CHERIF, A., ALTENBERGER, I. (2007):
  "Crack initiation and propagation in a stainless duplex steel during HCF and VHCF loading",
  

  Proc. Intl. Conference on Very High Cycle Fatigue, Ann Arbor, Michigan, USA, 19.-22. August 2007, auf CD-ROM.

• BACH, M., FRITZEN, C.-P. , ECKSTEIN B., SPECKMANN, H. (2007):
  "Self-Diagnostic Capabilities of Piezoelectric Transducers Using the Electromechanical Impedance",
  

  Proc. of the 6. Intl. Workshop on Structural Health Monitoring, Stanford, CA, Sept. 2007, pp. 1931-1938 and on CD-ROM.

• KRAEMER, P., FRITZEN, C.-P. (2007):
  "Concept for Structural Damage Identification of Offshore Wind Energy Plants",
  

  Fu-Kuo Chang (Ed.): Proc. of the 6. Intl. Workshop on Structural Health Monitoring, Stanford, CA, Sept. 2007, pp. 1881-1888 and on CD-ROM.

• FRITZEN, C.-P. , KRAEMER, P., XING K.J. (2007):
  "Damage Detection and Localization using Time Domain Residuals",
  

  Proc. World Forum on Smart Materials and Structures Technology, Chonqing&Nanjing, VR China, May, 22-27 2007, to be published on CD-ROM.

• XING, K.-J., FRITZEN, C.-P. (2007):
  "Structural Health Monitoring of Aircraft Components with the Impedance Method",
  

  Proc. World Forum on Smart Materials and Structures Technology, Chonqing&Nanjing, VR China, May, 22-27 2007, to be published on CD-ROM.

• LI, D.S., LI, H.-N. FRITZEN, C.-P. (2007):
  "On Modal Kinetic Energy and Effective Independence",
  

  Proc. 2nd International Operational Modal Analysis Conference, April 30 - May 2, 2007, Copenhagen, Denmark, Aalborg University, pp.143-152.

2006

• KLINKOV, M., FRITZEN, C.-P. (2006):
  "Online estimation of external loads from dynamic measurements",
  

  International Conference on Noise and Vibration Engineering, Leuven, Belgium, pp.3957-3968. LINK

• FRITZEN, C.-P., KLINKOV, M. (2006):
  "Online-Kraftidentifikation mit Robusten Beobachtern",
  

  VDI-Tagung Baudynamik, Kassel, VDI-Berichte 1941, VDI Verlag Düsseldorf, pp. 303-312.

• DÜBER, O., KÜNKLER, B., KRUPP, U., CHRIST H.-J., FRITZEN, C.-P. (2006):
  "Gefügecharakterisierung mehrphasiger Werkstoffe mittels EBSD",
  

  Praktische Metallographie, Vol. 43 Number 2, pp. 88-102. LINK

• KÖSTER, P., KÜNKLER, B., DÜBER, O., KRUPP, U., FRITZEN, C.-P., CHRIST, H.-J. (2006):
  "Modelling of the Transition from Stage I to Stage II Short Crack Propagation",
  

  Proc. International Conference on Crack Path, Parma, Italien, 14-16. September, on CD-Rom.

• CHRIST, H.-J., DÜBER, O., FLOER, W., FRITZEN, C.-P., KRUPP, U., KÜNKLER, B., SCHICK, A. (2006):
  "Microstructural effects on short fatigue crack propagation and their modelling",
  

  Fracture of Nano and Engineering Materials and Structures, Proceedings of the 16th European Conference of Fracture, ECF-16, Alexandroupolis, Greece, 3-7. Juli 2006, auf CD-ROM, (ISBN 1-4020-4626-X). LINK

• FERNÁNDEZ, A., GÜEMES, A., FRITZEN, C.-P., MENGELKAMP, G. (2006):
  "Comparison of Health Monitoring Systems with Fiber Bragg Grating and Piezoelectric Sensors",
  

  Proc. 3rd European Workshop Structural Health Monitoring, Granada, Spain, pp. 324-330. LINK

• FRITZEN, C.-P., MENGELKAMP, G., KROKER, A. (2006):
  "Damage Localization in a Stiffened Structure-Comparison of Different Methods",
  

  Proc. 3rd European Workshop Structural Health Monitoring, Granada, Spain, pp. 489-498. LINK

• KLINKOV, M., FRITZEN, C.-P. (2006):
  "Online Force Reconstruction using Robust Observers",
  

  Proc. 3rd European Workshop Structural Health Monitoring, Granada, Spain, pp. 617-626. LINK

• LI, D.-S., LI, H.-N.,FRITZEN, C.-P. (2006):
  "On the Physical Significance of the Norm Based Sensor Placement Method",
  

  Proc. 3rd European Workshop Structural Health Monitoring, Granada, Spain, pp. 1135-1143. LINK

• SCHULTE, R.T., BOHLE, K., FRITZEN, C.-P., SCHUHMACHER, G. (2006):
  "Optimal Sensor Placement for Damage Identification - An efficient forward-backward selection algorithm",
  

  Proc. 3rd European Workshop Structural Health Monitoring, Granada, Spain, pp. 1151-1159. LINK

• DÜBER, O., KÜNKLER, B., KRUPP, U., CHRIST H.-J., FRITZEN, C.-P. (2006):
  "Short Crack Propagation in Duplex Stainless Steel",
  

  Proc. 9th International Fatigue Congress, Atlanta, Georgia, USA, 14. Mai - 19. Mai 2006, on CD-Rom.

• TIAWONGSOMBAT, P., CAROLUS, T., FRITZEN, C.-P., Richter, W. (2006):
  "Implementation of an Active Noise Control Loop to an Aerofoil in an Turbulent Air Stream",
  

  Proc. DAGA 2006, 32. Jahrestagung für Akkustik, Braunschweig,Germany, 20-23. März, on CD-ROM.

• Fritzen, C.-P., Bohle, K. (2006):
  "Robust Regression in Model-Based Structural Health Monitoring",
  

  Proc of IMAC.XXIV, St. Louis, MO, Januar 2006, on CD-Rom.

• MENGELKAMP, G., FRITZEN, C.-P. (2006):
  "Combination of global and local methods for Structural Health Monitoring",
  

  Proc. of IMAC-XXIV, St. Louis, MO, Januar 2006, on CD-Rom.

• DÜBER, O., KÜNKLER, B., KRUPP, U., CHRIST, H.-J., FRITZEN, C.-P. (2006):
  "Experimental Characterisation and Two-Dimensional Simulation of Short Crack Propagation in an Austenitic-Ferritic Duplex Steel",
  

  International Journal of Fatigue, Vol. 28, Number 9, pp. 983-992. LINK

2005

• FRITZEN, C.-P.:
  "Recent Developments in Vibration-Based Structural Health Monitoring",
  

  In: Fu-Kuo Chang (Ed.): Proc. of the 5. Intl. Workshop on Structural Health Monitoring (Keynote Paper), Stanford, CA, Sept. 2005, pp. 42-60.

• MENGELKAMP, G., FRITZEN, C.-P.:
  "Multi-Scale Structural Health Monitoring in Striffened Structures",
  

  In: Fu-Kuo Chang (Ed.): Proc. of the 5. Intl. Workshop on Structural Health Monitoring, Stanford, CA, Sept. 2005, pp. 937-944.

• Künkler, B., Düber, O., Krupp, U., Christ, H.-J., Fritzen, C.-P.:
  "Mechanismenorientierte Simulation der mikrostrukturbestimmten Kurzrissausbreitung",
  

  Frontiers in Simulation; Simulationstechnique - 18^th ASIM Symposium in Erlangen September 2005, SCS Publishing House, 2005, Erlangen, pp. 63-68.

• Krupp, U., Düber, O., Christ, H.-J., Künkler, B., Köster, P., Fritzen, C.-P.:
  "Propagation Mechanisms of Microstructurally Short Cracks - Factors Governing the Transition from Short- to Long-Crack Behavior",
  

  Materials Science and Engineering, eingereicht 2005.

• FRITZEN, C.-P.:
  "Vibration-Based Structural Health Monitoring – Concepts and Applications",
  

  In: Proc. of the 6. Intl. Conference on Damage Assessment of Structures (Keynote Paper), Gdansk, Poland, July. 2005, pp. 3-18.

• Künkler, B., Düber, O., Krupp, U., Christ, H.-J., Fritzen, C.-P.:
  "Simulation of Short Crack Propa­gation – Transition from Stage I to Stage II",
  

  GAMM 2005 – Gesellschaft für Angewandte Mathematik und Mechanik, 28. März - 01. April 2005, Luxemburg, Luxemburg, p. 135.

• Künkler, B., Düber, O., Krupp, U., Christ, H.-J., Fritzen, C.-P.:
  "Short Crack Propa­gation in Duplex Steel – Modelling and Experimental Verification",
  

  ICF11 – 11th International Conference on Fracture, 20.-25. März 2005, Turin, Italien, auf CD-Rom.

• FRITZEN, C.-P., MENGELKAMP, G.:
  "In-Situ Damage Detection and Localisation in Stiffened Structures",
  

  Proc. of IMAC-XXIII, Jan. 2005, Orlando, auf CD-Rom.

2004

• FRITZEN, C.-P., MENGELKAMP, G., DIETRICH, G., RICHTER,W., CUERNO,C., LOPEZ-DIEZ, J., GÜEMES, A.:
  ''Structural Health Monitoring of the ARTEMIS Satellite Antenna using a Smart Structure Concept'',
  

  Proc. Second European Workshop on Structural Health Monitoring, 2004, Munich, S. 1075-1082.

• FRITZEN, C.-P., BOHLE, K.:
  ''Damage Identification using a Modal Kinetic Energy Criterion and Output Only Modal Data - Application to the Z24-Bridge'',
  

  Proc. Second European Workshop on Structural Health Monitoring, 2004, Munich, S. 185-194.

• DÜBER, O., KÜNKLER, B., KRUPP, U., CHRIST, H.-J., FRITZEN, C.-P.:
  ''Experimentelle Charakterisierung und zweidimensionale Simulation der Kurzrissausbreitung in einem Duplexstahl'',
  

  Beitrag zu: Abschlusskolloquium des Schwerpunktprogramms der DFG, Themenschwerpunkt: Mechanismenorientierte Lebensdauervorhersage für zyklisch beanspruchte metallische Werkstoffe, DVM Verlag, 2004, S. 69-83.

• KRUPP, U., DÜBER, O., CHRIST, H.-J., KÜNKLER, B., SCHICK, A., FRITZEN, C.-P.:
  ''Application of the EBSD technique to describe the initiation and growth behaviour of microstructurally short fatigue cracks in a duplex steel'',
  

  Journal of Microscopy (2004), Vol. 213, S. 313-320.

2003

• FRITZEN, C.-P., MENGELKAMP, G.:
  ''A Kalman Filter Approach to the Detection of Structural Damage '',
  

  In: Fu-Kuo Chang (Hrsg.) : Proc. of the 4. Intl. Workshop on Structural Health Monitoring(4. Intl. Workshop on Structural Health Monitoring Stanford University Sept. 2003). 2003, S. 1275-1284.

• FRITZEN, C.-P., MENGELKAMP, G., GÜEMES, A.:
  ''Detection of Small Delaminations in a CFRP Plate by Vibration-Based Structural Health Monitoring'',
  

  In: American Society for Composites (Hrsg.) : Proc. of the 14th. Intl. Conference on Composite Materials (14th. Intl. Conference on Composite Materials San Diego 14.-18.7.2003). 2003, S. 110-121.

• FRITZEN, C.-P., MENGELKAMP, G., GÜEMES, A.:
  ''Elimination of Temperature Effects on Damage Detection within a Smart Structure Concept'',
  

  In: Fu- Kuo Chang (Hrsg.) : Proc. of the 4. Intl. Workshop on Structural Health Monitoring. 2003, S. 1530-1538 (4. Intl. Workshop on Structural Health Monitoring Stanford University Sept. 2003).

• FRITZEN, C.-P., MENGELKAMP, G.:
  ''Schwingungsbasierte Diagnose von Delaminationen in einer CFK-Struktur mit Hilfe piezoelektrischer Aktoren und Sensoren'',
  

  In: VDI (Hrsg.) : VDI-Berichte 1788 (VDI-Schwingungstagung Magdeburg September 2003). 2003, S. 119-133.

• KÜNKLER, B., SCHICK, A., FRITZEN, C.-P., FLOER, W., KRUPP, U., CHRIST, H.-J.:
  "Simulation der mikrostrukturbestimmten Kurzrissausbreitung",
  

  steel research international (2003),74 (8), S. 514-518.

• FLOER, W., KRUPP, U., CHRIST, H.-J., SCHICK, A., FRITZEN, C.-P.:
  ''Short Fatigue Cracks - Mechanism and microstructural effects in Ti.6.8MO-4.5Fe-1.5Al'',
  

  Materials Week, 2002, erscheint 2003.

• KÜNKLER, B., SCHICK, A., FRITZEN, C.-P., FLOER, W., KRUPP, U., CHRIST, A.:
  ''Simulation der mikrostrukturbestimmten Kurzrissausbreitung'',
  

  Beitrag zu 35. Tagung DVM-Arbeitskreis Bruchvorgänge, Themenschwerpunkt: Forschritte der Bruch- und Schädigungsmechanik – Simulationsmethoden der Bruchmechanik, DVM Verlag, DVM Bericht 235, 2003, S.101-110.

• FLOER, W., KRUPP, U., CHRIST, H.-J., SCHICK, A., FRITZEN, C.-P.:
  ''Short Fatigue Crack Growth Phenomena in Beta Titanium Alloy'',
  

  eingereichter Beitrag zur 10^th World Conference on Titanium, July 13^th-18^th 2003, in Hamburg.

• BOHLE, K., FRITZEN, C.-P. :
  ''Modellgestützte Überwachung von Bauwerkstrukturen auf der Basis von Schwingungsmessdaten'',
  

  GESA-Symposium (2003), Braunschweig.

• Neef, M., Fritzen, C.-P., Schuhmacher, G.:
  "Evaluation of Mount Loads in Dynamic Testing of a Jet Engine",
  

  Mechanical Systems and Signal Processing (2002). Erscheint 2003.

• FRITZEN, C.-P., BOHLE, K.:
  ''Global Damage Identification of the 'Steelquake' Structure using Modal Data'',
  

  Mechanical Systems and Signal Processing (2003), 17 (1), S. 111-117.

• BOHLE, K., FRITZEN, C.-P.:
  ''Results obtained by Minimising Natural Frequency and Mac-Value Errors of a Plate Model'',
  

  Mechanical Systems and Signal Processing (2003), 17 (1), S. 55-64.

2002

• Neef, M., Fritzen, C.-P., Schuhmacher, G.:
  "Evaluation of Mount Loads in Dynamic Testing of a Jet Engine",
  

  Mechanical Systems and Signal Processing (2002).

• FRITZEN, C.-P., BOHLE, K.:
  "Damage Identification within the Framework of Intelligent Structures Concepts",
  

  Structural Dynamics, EURODYN 2002, 2.-5. Sept. 2002, Munich, S. 275-279.

• FRITZEN, C.-P., MENGELKAMP, G., GÜEMES, A.:
  "A CFRP Plate with Piezo-Electric Actuators and Sensors as Self-Diagnostic Intelligent Structure",
  

  Proceedings of ISMA 2002, 16th-18th Sept. 2002, Leuven, Belgium, pp. 185-191.

• Frohn, A., Dick, B., Fritzen, C.-P.:
  "Corneal Impact of Ultrasound and Bevel Position in Phacoemulsification",
  

  Journal of Cataract&Refractive Surgery, Vol. 28, Sept. 2002, pp. 1677-1680.

• Schick, A., Fritzen, C.-P., Floer, W., Hu, Y.M., Krupp, U., Christ, H.-J.:
  "Microstructural short fatigue crack growth – effect of mixed mode conditions and crack closure",
  

  14th European Conference on Fracture, 8th – 13th September, 2002, Cracow, Poland, S.203-210.

• SCHICK, A., KÜNKLER, B., FRITZEN, C.-P.:
  "Simulation der mikrostrukturellen Stadium-I Rissausbreitung",
  

  Festschriftband zum 65. Geburtstag von Univ.-Prof. Dr.-Ing. K. Schiffner, Sept. 2002, Siegen, S. 271-290.

• FLOER, W., KRUPP,U., CHRIST, H.-J., SCHICK, A., FRITZEN, C.-P.:
  "Crack Closure Phenomena of Microstructural Short Fatigue Cracks in a Beta.-Titanium Alloy",
  

  Proc. of 8th International Fatigue Congress 2002, Blom, A.F. (Eds.), Stockholm, Sweden, 02.-07. June 2002, EMAS, UK, S.2369-2376.

• FRITZEN, C.-P., MENGELKAMP, G.:
  "Detection of Delaminations in Composite Materials Using a Smart Structures Concept",
  

  Proc. First European Workshop on Structural Health Monitoring, 2002, Paris, pp. 237-244.

• FLOER, W., KRUPP,U., CHRIST, H.-J., SCHICK, A., FRITZEN, C.-P.:
  "Short Fatigue Cracks – Mechanism and microstructural effects in Ti-6.8Mo-4.5Fe-1.5Al, Materials Week",
  

  September 2002, Munich.

• Schick, A., Christ, H.-J., Floer, W., Fritzen, C.-P., Krupp, U:
  "Experimentelle Charakterisierung und zweidimensionale Simulation der mikrostrukturbestimmten Ermüdungsrissausbreitung in einer ß-Titanlegierung",
  

  DVM-Kolloquium zum DFG Schwerpunktprogramm "Mechanismenorientierte Lebensdauervorhersage für zyklisch beanspruchte metallische Werkstoffe", 13. und 14. Feb. 2002, Berlin, S. 189-203.

• Schick, A., Christ, H.-J., Floer, W., Fritzen, C.-P., Krupp, U.:
  "Experimentelle Charakterisierung und zweidimensionale Simulation der mikrostrukturbe-stimmten Ermüdungsrissausbreitung in einer b-Titanlegierung",
  

  Materialwissenschaft und Werkstofftechnik, 2002, WILEY-VCH Verlag, Weinheim, 33, S. 244-251.

• FLOER, W., LEI, Y. M., HU, U., KRUPP,U., CHRIST, H.-J., SCHICK, A., FRITZEN, C.-P.:"Initiation and Propagation of Microstructural Short Fatigue Cracks in a Beta-Titanium Alloy",
  

  Review of Aeronautical Fatigue Investigation in Germany during the Period June 1999 to May 2001, compiled by C.D. Donne, Institute of Materials Research, German Aerospace Center, DLR, Köln, 2002, S.40-41.

2001

• Krupp U., Floer, W., Christ, H.-J., Schick, A., Fritzen, C.-P.:
  "Mechanisms of Short Crack Initiation and Propagation in a b-Titanium Alloy",
  

  Phil. Mag., 6th International Conference on the Fundamentals of Fracture, Cirencester, UK, 25-30 March 2001.

• Krupp U., W. Floer, H.-J. Christ, A. Schick, C.-P. Fritzen:
  "Microstructural Features of Short Crack Growth in a Beta-Titanium Alloy",
  

  Proc. 10^th International Conference of Fracture, 3.-7. Dec. 2001, Honolulu, Hawaii, on CD ROM.

• Fritzen, Claus-Peter ; Bohle, Karsten:
  "Application of Model-Based Health Monitoring to a Seismically Loaded Structure"
  

  In: Smart Materials and Structures 10 (2001), S. 452-458.

• Fritzen, Claus-Peter ; Bohle, Karsten:
  "Damage Localization Techniques based on Modal Analysis Test Results- An Application to the COST F3 "Steelquake" Structure",
  

  In: Prof. Link, M. (Hrsg.) : International Conference on Structural System Identification (Proceedings Intl. Conf. on "Structural System Identification" Kassel September 5-7). Bd. 2. Kassel : Universitätsbibliothek Kassel, 2001, S. pp. 363-373. - ISBN 3-89792-055-7.

• Fritzen, Claus-Peter ; Bohle, Karsten:
  "Model-Based Damage Identification from Changes of Modal Data - A Comparison of Different Methods",
  

  In: K.M. Holford ; J.A. Brandon ; J.M. Dulieu-Barton ; M.D. Gilchrist ; K. Worden (Hrsg.) : Damage Assessment of Structures (Proceedings of 4. International Conference on Damage Assessment of Structures (DAMAS 2001) Cardiff, Wales June, 25-27). Uetikon-Zuerich,Switzerland, : Trans Tech Publications Ltd., 2001, S. 65 - 74. - ISBN 0-87849-879-6.

• Nauerz, Andreas ; Fritzen, Claus-Peter:
  "Model-Based Damage Identification Using Output Spectral Densities",
  

  In: Journal of Dynamic Systems, Measurement, and Control 123 (2001), S. 1-8.

• Fritzen, Claus-Peter ; Bohle, Karsten:
  "Vibration-Based Global Damage Identification-A Tool for Rapid Evaluation of Structural Safety",
  

  In: Fu-Kuo Chang (Hrsg.) : Structural Health Monitoring (Proc. 3. Intl. Workshop on Structural Health Monitoring Stanford Universtity, CA, USA September 11-13). Florida : CRC Press LLc, 2001, S. pp. 849-859. - ISBN 1-56676-881-0.

2000

• FRITZEN, C.-P.; BOHLE, K.; STEPPING, A.:
  "Application of Model-Based Health Monitoring to a Seismically Loaded Structure",
  

  In: Sas, P.(Publ.) : Proceedings ISMA 25 (Noise and Vibration Engineering KU Leuven13.-15.09.2000, Bd. 1, Leuven Heverlee, Belgium : 13.-15.Sept.2000, S. 251-258.

• FRITZEN, C.-P.; BOHLE, K.:
  "Parameter Selection Strategies in Model-Based Damage Detection",
  

  Structural Health Monitoring 2000, 2nd. Intl. Workshop on Structural Health Monitoring, Stanford University, CA, pp. 901-911.

• FLOER,, W; HU Y.M; CHRIST, H.-J.; SCHICK, A.; FRITZEN, C.-P.:
  "Influence of Crystallographic Misorientation on the Initiation and Growth of Short Fatigue Cracks in a Beta-Titanium Alloy",
  

  13th European Conference on Fracture,6-9 September 2000.

• FRITZEN, C.-P.; BOHLE, K.; STEPPING, A.:
  "Damage Detection in Structures with Multiple Cracks Using Computational Models",
  

  In: Güemes, J.A.; Universidad Politécnica de Madrid, Spanien (Hrsg.) : European COST F3 Conference on SYSTEM IDENTIFICATION & STRUCTURAL HEALTH MONITORING Madrid, 05.-06.07.2000, S.191-200.

• SCHICK, A.; FRITZEN, C.-P.; FLOER, W.; HU, Y.M.; KRUPP, U.; CHRIST, H.-J.:
  "Stress Concentrations at Grain Boundaries due to Anisotropic Elastic Material Behavior",
  

  In: A.P.S Selvadurai, C.A. Brebbia (Hrsg.) : Damage and Fracture Mechanics VI ( WITPress Southhampton, Boston, May 2000) 2000, S. 393-402.

• FROHN, A.; DICK, B.; FRITZEN, C.-P.; BREITENBACH, M.; THIEL, H.-J.:
  "Ultrasonic Transmission in Viscoelastic Substances",
  

  Journal os Cataract and Refractive Surgery, Vol. 26(2) (2000), S. 282-286.

• KRUPP, U.; FLOER, W.; CHRIST, H.-J.; SCHICK, A.; FRITZEN, C.-P.; HU, Y.M.:
  "Experimentelle Erfassung und modellmäßige Beschreibung der Rissbildung und des Kurzrisswachstums zur Vorhersage der Ermüdungslebensdauer einer Beta-Titanlegierung.",
  

  In: Deutsche Forschungsgemeinschaft (Hrsg.) : Mechanismenorientierte Lebensdauervorhersage für zyklisch beanspruchte metallische Werkstoffe (Kolloq. d. DFG in Zus.arb. mit dem Deutschen Verband für Materialforschung und -prüfung, Bremen 24.-25.-02.2000, S. 165-177.

1999

• FRITZEN, C.-P. , BOHLE, K. (1999):
  "Model-Based Health Monitoring of Structures - Application to the I40-Highway Bridge",
  

  2. Intl. Conf. On Identification in Engineering Systems, Swansea, UK, pp. 492-505. Kurzfassung

• FRITZEN, C.-P. , BOHLE, K. (1999):
  "Modellgestützte Diagnose von Schädigungen an Tragwerken – Eine Anwendung auf eine Autobahnbrücke",
  

  VDI Berichte Nr. 1466, Düsseldorf, pp. 341-354. Kurzfassung

• FRITZEN, C.-P. , BOHLE, K. (1999):
  "Identification of Damage in Large Scale Structures by Means of Measured FRFs - Procedure and Application to the I40-Highway-Bridge, DAMAS99, Dublin/Ireland",
  

  Key Engineering Materials, Vols. 167-168, pp. 310-319. LINK

• FRITZEN, C.-P. , GANS, P., WIESE, D., BREITWIESER, M. (1999):
  "A Method for Model-Based Balancing of Flexible Rotors Mounted on Oil-Film Bearings Without Trial Weights",
  

  Proc. ASME Design Eng. Techn. Conf., Paper No. DETC 99 / VIB-8291, 17th Bienial Conf. on Mechanical Vibration and Noise, Sept. 12-15, Las Vegas, Nevada, USA.

1998

• FRITZEN, C.-P., JENNEWEIN, D., TH. KIEFER:
  "Damage Detection Based on Model Updating Methods",
  

  Mechanical Systems and Signal Processing, Vol. 12 (1), Januar 1998, pp. 163-186. Kurzfassung

• FRITZEN, C.-P., JENNEWEIN, D.:
  "Model-Based Detection of Structural Damage by Means of Vibration Measurement Data",
  

  European Conference on Composite Materials, ECCM-8, Vol. 3, 3.-6. Juni 1998, Naples, Italy, pp. 261-268 Kurzfassung

• FRITZEN, C.-P., JENNEWEIN, D.:
  "Ein Verfahren zur Selbstdiagnose von Strukturen mit verteilten Sensoren und Aktoren",
  

  ZAMM, Z. Angew. Math. Mech. 79 (1999), Nr. S2, S. 611-612.

• FRITZEN, C.-D., JENNEWEIN, D., BUCHEN, D.:
  "Smart Diagnosis of Structural Damage for Systems with Distributed Sensors and Actuators",
  

  Proc. ISMA23: Noise and Vibration Engineering, Vol. 3, Leuven, Belgium, 16.-18. September 1998, pp. 1329-1336.

• NAUERZ, A., FRITZEN, C.-P.:
  "Fehlerlokalisation in kondensierten FEM-Modellen anhand von Leistungsdichten",
  

  ZAMM, Z. Angew. Math. Mech. 79 (1999), Nr. S2, S. 619-620.

• NAUERZ, A., FRITZEN, C.-P.:
  "An Error Localization Technique by Means of Spectral Densities",
  

  Proc. ISMA23: Noise and Vibration Engineering, Vol. 1, Leuven, Belgium, 16.-18. September 1998, pp. 143-147.

• FRITZEN, C.-P., DREYER, M.:
  "Numerical and experimental investigations of the dynamics of valve trains in combustion engines",
  

  Proc. ISMA23: Noise and Vibration Engineering, Vol. 1, Leuven, Belgium, 16-18. Sept.1998, pp. 259-267.

• FRITZEN, C.-P., JENNEWEIN, D., BUCHEN, D.:
  "Smart Diagnosis of Structural Damage for Systems with Distributed Sensors and Actuators",
  

  Proc. ISMA23: Noise and Vibration Engineering, Vol. 3, Leuven, Belgium, 16-18. Sept.1998, pp. 1329-1336.

• FRITZEN, C.-P.:
  "Grundlagen der Bruchmechanik",
  

  in "Ermüdungsverhalten metallischer Werkstoffe" (H.-J. Christ, Ed.), MAT-INFO, Werkstoff-Informationsgesellschaft, Frankfurt, 1998, S. 87-120.

• FRITZEN, C.-P., JENNEWEIN, D., BUCHEN, D.:
  "Smart Diagnosis of Structural Damage for Composite Beams with Distributed Sensors and Actuators",
  

  Proc. Int. Conf. On Smart Structures 1998, Sept. 21-23, 1998 Rome, Italy, pp. 161-168.

1997

• FRITZEN, C.-P., JENNEWEIN, D., TH. KIEFER:
  "Damage Detection Based on Vibration Measurements and Inaccurate Models",
  

  Proc. of DETC'97, 1997 ASME Design Eng.Techn. Conf., Sacramento, CA, Sept. 1997, paper no. DETC97/VIB-4157, 12 Seiten. Kurzfassung

• FRITZEN, C.-P., ZHANG, X.-N., JENNEWEIN, D.:
  "Direct Estimation of Nonlinear Joints",
  

  Proc. of DETC'97, 1997 ASME Design Eng.Techn. Conf., Sacramento, CA, Sept. 1997, paper no. DETC97/VIB-4156, 7 Seiten. Kurzfassung

• FRITZEN, C.-P.:
  "Grundlagen der Bruchmechanik",
  

  Seminarband zum DGM-Seminar "Ermüdungsverhalten metallischer Werkstoffe" (H.-J. Christ, Ed.), Universität-GH-Siegen, 24.-29.Sept. 1997, S. 53-87.

• FROHN, A., DICK, B., FRITZEN, C.-P., BREITENBACH, M.:
  "Ultraschallausbreitung in Viskoelastika",
  

  Klin. MBl. Augenheilk. 12, 1997, p. 212s2.

• SEIBOLD, S., WEINERT, K., FRITZEN, C.-P.:
  "Diagnose von Wellenrissen an rotierenden Maschinen",
  

  Proc. IV. Kolloquium Technische Diagnostik, 14.3-15.3.1996, TU Dresden, S.125-134.

• NAUERZ, A., FRITZEN, C.-P. :
  "Error Localization Using Power Spectra",
  

  Proc. ISMA21: Noise and Vibration Engineering, Vol. II, Leuven, 18-20. Sept.1996, S. 973-982.

• FRITZEN, C.-P:, JENNEWEIN, D., BUCHEN, D.:
  "Model Based Damage Detection From Vibration Data",
  

  Proc. ISMA21: Noise and Vibration Engineering, Vol. II, Leuven, 18-20. Sept. 1996, S. 1017-1032.

• JENNEWEIN, D., FRITZEN,.C.-P.:
  "On the Design of Optimal Input Signals for Parameter Identification",
  

  Proc. ISMA21: Noise and Vibration Engineering, Vol. II, Leuven, 18-20. Sept. 1996, S. 1287-1298.

• SEIBOLD, S., FRITZEN, C.-P., WAGNER, D.:
  "Employing Identification Procedures for the Detection of Cracks in Rotors",
  

  Modal Analysis, The Int. Journal of Analytical and Experimental Modal Analysis, Vol. 11, Nos. 3 and 4, 1996, pp 204-215.

1995

• JENNEWEIN, D., FRITZEN,.C.-P.:
  "Optimized and Improved Input Signals for Parameter Identification"
  

  Proc. 13th Int. Modal Analysis Conference (IMAC), Nashville, Tennessee, 1995, pp. 1832-1838.

• FRITZEN, C.-P:, SEIBOLD. S, BUCHEN, D.:
  "Application of Filter Techniques for Damage Detection in Linear and Non-Linear Mechanical Structures",
  

  Proc. 13th Int. Modal Analysis Conference (IMAC), Nashville, Tennessee, 1995, pp.1874-1881.

• SEIBOLD, S., FRITZEN, C.-P., WAGNER, D.:
  "Employing Identification Procedures for the Detection of Cracks in Rotors",
  

  Proc. 13th Int. Modal Analysis Conference (IMAC), Nashville, Tennessee, 1995, pp. 1378-1384.

• SEIBOLD, S., FRITZEN, C.-P., WAGNER, D.:
  "Modellgestützte Verfahren zur Diagnose von Rissen in Rotoren", in "Schwingungen in roteirenden Maschinen III",
  

  H.Irretier, R. Nordmann, H. Springer (Hrsg.),Vieweg Verlag, Braunschweig, Wiesbaden, März 1995, S.55-64.

• SEIBOLD, S., WEINERT, K., FRITZEN, C.-P.:
  "Einsatz von Schätzverfahren zur Lokalisation und Diagnose von Wellenrissen",
  

  Tagungsband zum 6. Problemseminar Identifikation mechanischer Systeme, Schmochtitz, 2. u. 3. Mai 1995, S.89-97.

• FRITZEN, C.-P. , BUCHEN, D., SEIBOLD, S.:
  "Modellgestützte Verfahren zur Diagnose von Rissen aus Schwingungen",
  

  Tagungsband zum 6. Problemseminar Identifikation mechanischer Systeme, Schmochtitz, 2. u. 3. Mai 1995, S.168-179.

1993

• FRITZEN, C.-P.: SEIBOLD, S.:
  "Bestimmung von Rotor- und Dichtspaltparametern mittels Identifikation",
  

  in: Schwingungen in rotierenden Maschinen, Irretier, Nordmann, Springer (Hrsg.), Vieweg Verlag, Braunschweig, Wiesbaden, 1993, S. 160-167.

• BAJKOWSKI, J., FRITZEN, C.-P., SEIBOLD, S., SÖFFKER, D.:
  "Verfahren zur Rißdetektion - Vergleich zweier modellgestützter Vorgehensweisen",
  

  in: Schwingungen in rotierenden Maschinen II, Irretier, Nordmann, Springer (Hrsg.), Vieweg Verlag, Braunschweig, Wiesbaden, 1993, S. 55-63.

• SEIBOLD, S., FRITZEN, C.-P., LEIFELD, A.:
  "A Combined State and Parameter Estimator Applied to Fault Detection",
  

  IUTAM Symposium on Identification of Mechanical Systems, Bergische Universität Gesamthochschule Wuppertal, 23. - 27.08.1993, Springer Verlag.

• SEIBOLD, S.: SÖFFKER, D.; FRITZEN, C.-P.:
  "Modellgestützte Detektion von Wellenrissen",
  

  4. Tagung über Dynamische Probleme Modellierung und Wirklichkeit, Schriftenreihe des Curt-Risch-Instituts, Hannover, 1993, S. 309-328.

• FRITZEN, C.-P., KIEFER, Th., HÄNISCH v., K.:
  "Schadenserkennung mit Hilfe von Fehlerlokalisationsverfahren",
  

  4. Tagung über Dynamische Probleme - Modellierung und Wirklichkeit, Schriftenreihe des Curt-Risch-Instituts, Hannover 1993.

• SEIBOLD, S. FRITZEN, C.-P.:
  "Identification Procedures as Tools for Fault Diagnosis of Rotating Machinery",
  

  Int. Journal of Rotating Machinery, Vol. 1, No. 3-4, 1995, pp. 267-275.

1992

• FRITZEN, C.-P., KIEFER, Th. (1992):
  "Localization and Correction of Errors in Analytical Models",
  

  Proc. 10th Int. Modal Analysis Conference (IMAC), San Diego, California, pp.1063-1071.

• FRITZEN, C.-P., PETERS, B. (1992):
  "Development of a New Attachment for Dental Prostheses",
  

  Proc. Int. Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Swansea, UK, pp. 159-168.

• FRITZEN, C.-P., SEIBOLD, S. (1992):
  "Identifikation nichtlinearer mechanischer Systeme durch kombinierte Zustands- und Parameterschätzung",
  

  ZAMM 73 (1993) 6, pp. T816-T819.

• FRITZEN, C.-P., KIEFER, Th. (1992):
  "Localization and Correction of Errors in Finite-Element-Models based on Experimental Data",
  

  Proc. 17th Int. Seminar on Modal Analysis and Structural Dynamics, Katholieke Universiteit Leuven, Leuven, Belgium.

• SEIBOLD, S., FRITZEN, C.-P., HAHN, H.G. (1992):
  "Identifikation linearer und nichtlinearer mechanischer Systeme und Anwendung bei der Schadenserkennung",
  

  1. Zwischenbericht zum DFG-Forschungsvorhaben Ha 1487/3-1, Kaiserslautern.

• SEIBOLD, S., FRITZEN, C.-P. (1992):
  "A Comparison of Time Domain Identification Methods for Nonlinear Systems",
  

  Proc. 17th ISMA, International Seminar on Modal Analysis and Structural Dynamics, KU Leuven, Leuven, pp. 371-385.

1990-1991

• FRITZEN, C.-P. (1990):
  "Reguläres und chaotisches Verhalten einer Laval-Welle mit Riß",
  

  ZAMM, Vol. 70, Number 4, pp. T112-T114. LINK

• FRITZEN, C.-P., SEIBOLD, S. (1990):
  "Identification of Mechanical Systems by Means of the Extented Kalman Filter",
  

  Proc. IFToMM Conf. on Rotordynamics, Lyon, Frankreich, pp. 423-429.

• FRITZEN, C.-P. ZHU, S. (1990):
  "Identifikation der Parameter von Finite-Element-Modellen mittels gemessener Übertragungsfunktionen",
  

  Dynamische Probleme - Modellierung und Wirklichkeit, Mitteilungen des Curt-Risch-Instituts d. Universität Hannover, Hannover, pp. 351-371.

• FRITZEN, C.-P., ZHU, S., KIEFER, Th. (1991):
  "System Identification as Tool for the Systematic Correction of Finite-Element Models",
  

  Structural Dynamics, W. B. Krätzig et.al. (Ed.), Vol. 1, pp. 331-338.

• ZHU, S.; FRITZEN, C.-P. (1991):
  "Identifikation der physikalischen Parameter von FE-Modellen",
  

  ZAMM, Vol. 71, Number 4, pp T145-T147. LINK

• SEIBOLD, S.: FRITZEN, C.-P. (1991):
  "Recursive Identification of Nonlinear Systems by Means of the Extended Kalman Filter",
  

  Proc. 9th IMAC, Florence, Italy pp. 802-809.

• FRITZEN, C.-P., ZHU, S. (1991):
  "Updating of FE Models by Means of Measured Information",
  

  Computers & Structures, Vol. 40, Number 2, pp. 475-486. LINK

• FRITZEN, C.-P., SEIBOLD, S. (1991):
  "Einsatz von Identifikationsverfahren zur Diagnose von Rissen in rotierenden Wellen",
  

  IX. Symposium Verformung und Bruch, Magdeburg, pp. 189-193.

• SEIBOLD, S., FRITZEN, C.-P. (1991):
  "Recursive Identification of Nonlinear Systems by Means of the Extended Kalman Filter",
  

  Proc. Florence Modal Analysis Conf., pp. 253-260.

1987-1989

• FRITZEN, C.-P., WENDEL, J. (1987):
  "Ein Verfahren zur Rißlängenbestimmung bei Ermüdungsversuchen",
  

  VDI-Berichte 631, Düsseldorf, pp. 343-358.

• FRITZEN, C.-P. (1988):
  "Identifikation von Massen-, Dämpfungs- und Steifigkeitsparametern schwingungsfähiger mechanischer Systeme",
  

  VDI-Berichte 679, Düsseldorf, pp. 1-16.

• FRITZEN, C.-P., WENDEL, J. (1989):
  "Rißausbreitungsmodelle zur Simulation des Rißwachstums in metallischen Bauteilen",
  

  VDI-Berichte 731, Düsseldorf, pp. 53-66.

• FRITZEN, C.-P., ZHU, S. (1989):
  "Systematic Updating of Finite-Element Models by means of Measured Transfer Functions",
  

  Proc. 12th ASME Conf. on Mechanical Vibration and Noise, Book No. HO508D, Montreal, Canada, pp. 363-369.

• FRITZEN, C.-P., VOIGT, A. (1989):
  "Entwicklung einer Feder für zahnprothetische Anwendungen",
  

  Seminarband Mechanik und Bruchmechanik, Universität Kaiserslautern, pp. 34-45.

• ZHU, S.; FRITZEN, C.-P. (1989):
  "Identifikation der physikalischen Parameter von FE-Modellen aus gemessenen Übertragungsfunktionen",
  

  Seminarband Mechanik und Bruchmechanik, Universität Kaiserslautern, pp. 84-97.

1983-1986

• FRITZEN, C.-P., NORDMANN, R., WEBER, D. (1983):
  "Modification of Eigenfrequency Spectra of Elastomechanical Systems",
  

  Proc. of 'VII Congresso Brasilieiro de Engenharia Mecanica', Paper No. C-43, Uberlandia, Brazil, pp. 437-450.

• FAN, T. Y., HAHN, H. G., TENHAEFF, D., FRITZEN, C.-P. (1984):
  "Computer Realization of the Boundary Integral Method in Static and Dynamic Fracture Mechanics, Computational Examples and some Comments",
  

  Journal of Beijing Institute of Technology, Number 3, Beijing, VR China, pp. 1-24.

• FRITZEN, C.-P. (1986):
  "Identification of Mass, Damping and Stiffness Matrices of Mechanical Systems",
  

  Journal of Vibration, Acoustics, Stress and Reliability in Design, Transactions of the ASME, Vol. 108, pp. 9-16. LINK

• FRITZEN, C.-P. (1986):
  "Ein Beitrag zur Identifikation der Massen-, Dämpfungs- und Steifigkeitsmatrizen linearer mechanischer Systeme",
  

  Dr.-Ing. Dissertation, Universität Kaiserslautern. LINK